error

Recent contents Top users
  1. S

    Fan isolation switch configuration error

    Hello Guys I am new to the forum I was looking for a little advise if possible. My bathroom fan isolation switch has cracked & was looking to get it replaced. I isolated the supply and inspected it. As it looked very simple to replace I purchased a new switch. The new switch arrived but it has...
  2. M

    Honeywell Accenta G4 setting error

    I have just installed a Honeywell Accenta G4 system. All ok apart from 2 queries: The entry/exit zone 1 is a PIR (there are no door contacts on my system, just 2 PIR's) It is set to zone 1. The second PIR is in the lounge. The system will set ok, but only after I am out of the range of the zone...
  3. D

    air conditioner high-low voltage error

    Hello friends. My air conditioner gives E6 error. It gives High / Low voltage error in the user manual. But when I measure the incoming energy, it's 220V. reading. I am uploading a few photos below. There is no energy in cable number 5 in the first picture. Does it have to be? The air...
  4. 0

    UK RED error code on electricity meter

    Hi all , We have moved in to a flat in which we have lived for 6 years now. We have had a representative coming in to read the meter. We have had some issues with the bills where charges were in range of 300 pounds a month. Service provider said that they will monitor situation. Last months...
  5. M

    Electricity meter error code

    Hello, I have a Landys Gyr E110 electricity meter, it is currently displaying a mesage A 04.07 intermitently and also seems to be recording too high a usage, when I turn everything off in the house it is still recording usage. Anyone know what this mesage means or any other thoughts? Thanks for...
  6. P

    The apollo advanced mx pro panel is showing an error that a smoke detector is faulty but it seems to be blinking properly.

    The detector is working properly. We have checked it physically. But the pannel is showing fault in that detector. Please give me a solution
  7. dnjr

    Fluke 1663 multifunction tester error code 4

    Dear all Testing Zs on fluke 1663 returned an error code 4 I thought this was an earth fault but another spark said it’s a voltage on the line. Anyone have the correct answer ? Cheers
  8. J

    Does anyone know how to reset a set of megger mft 1721 at all please? It’s got an error code of 76 :/

    Does anyone know how to reset a set of megger mft 1721 at all please? It’s got an error code of 76 :/
  9. P

    On site Guide error

    Page 186 Figure G4.9 Generic schedule of test results maximum permitted Zs. These values are all the same 40,32 and 6A mcbs have the same value ?. They obviously don't proof read.
  10. J

    Error E014 (overtemperature) in Aurora PVI 3600 invertor

    Does anyone know if there is a typical fix for this? Someone has given me their old inverter because of of the error code.
  11. gazdkw82

    Megger MFT PFC error message

    I used a friends Megger today and we both came up with an error he hasn't seen before. We was performing a PFC test at the imcoming of a new DB. Leads were in line and neutral ports and tester set to L-N, 2 lead test, Zmax. As soon as you make the connection the tester beeped and flashed <PE>...
  12. S

    Error codes won't stay away

    So here are the 3 trouble codes P0443 P0141 P0135 P0141 O2 Sensor bank 1 P0135 02 Sensor bank 2 P0433 Evaporative emissions system purge control valve circuit. There is a bit of a sad story behind this. A friend owns an xc Barina and her heater wasn't working. I offered to check her...
  13. S

    communication error on sonnen Macht inverter

    we are going out to see someone who had a sonnen macht 3kw inverter installed a few years ago. It is showing a 'communication error' and has stopped working for 2 days. I can't find any information on this inverter as i understand the company was dissolved in 2017 and we didn't install this so...
  14. Last plumber

    Fluke 1652 Error 1 code, any ideas what to look for?

    As above really. My tester is showing an Error 1 code right from switching it on. New batteries, battery terminals all clean, voltage is good at the two terminals on the battery box/holder. All internal fuses are good too. Is this the end?
  15. Big Man

    Inverter E031 error message

    So PV not my area. My sisters inverter Aurora Power One has come up with a terminal E031 error and has been repeatedly clicking trying to reset so she has switched it off following the instructions. She asked me what happens to all the energy the solar panels create and it through me. I think...
  16. C

    Solic 200 red lights error

    Hope this is is correct forum area. i have issue with new set up and solic 200. As I understand it when during day and getting solar power there should normally get 3 green lights and when excess power is generated should get a single red light on display. Is this correct . I seem to get 2 red...
  17. J

    Schoolboy Error 2kw electric fire

    Think I've made a schoolboy error Running a brand new 2kw electric fire from the mains via an extension. Smelt burning tonight and found the plug and socket housing red hot after the fire switched itskit off. Checked the extension plug to find it has only a 5 amp fuse inside....... Is this...
  18. static zap

    An ECHO - Electrician Talk , small error -Title side

    Most recent Poster seems to be auto-credited with being thread -creator- .... Correct ORIGINAL Thread Name + creation date. -- LHS Title side ! Original poster's Name - Disappears, replaced most recent-commenter ! ( Just notice my name on a thread - from a day before ---time travel !)...
  19. T

    Landis and gyr meter display error??

    hi all, I have had an old gent recommended to me with what he thinks is a fault on his PV generation meter (landis and gyr 5235) not sure which model. He has explained that his meter seems to be switching from displaying the current date and what he describes as a portcullis displayed on the...
  20. L

    Invertor Error - FE Not Connected

    Hi guys. So, we've had solar panels installed on the roof for about 3 years now, and just recently, had an issue where the Invertor in the loft was bleeping. Went up to investigate, and it'd stopped... So, a few days later, heard the bleeping again, went up to check, and could see the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock