fitting

Recent contents Top users
  1. mainline

    UK Fitting a timer to an electric aga so it can't be used in the night

    A few months ago I fitted a change over switch to an electric oven/hob and a converted to electric aga stove, stopping them being used at the same time. I've now been asked to fit a timer so that the Aga can't be left on overnight. I'm not happy to do this for various reasons, but can anyone...
  2. D

    Issues with old light fitting replacement

    Hi all. Removed an ancient light fitting, replaced with a newer one, the light comes on but can't be turned off with the switch. It was working before. Any idea where I'm going wrong? The old light fitting had all neutral and all live to the wrapped and inserted into the corresponding terminals...
  3. HappyHippyDad

    Fitting your own air con unit?

    I have a large gym in the garden and it gets ridiculously hot in the summer. I have utilised pretty much every inch of space and do not want to put a plug in air con unit that sits on the floor as it would just be in the way. What puts me off a wall unit is the fact you have to get an F-gas...
  4. D

    Fitting Weather Compensation

    I am looking to retrofit weather compensation to my Worcester Bosh System boiler running an S Plan. Looked at the Worcester Greenstar Sense II Weather Compensation unit but its a bit expensive at over £200. Was looking for recommendations from others who had fitted weather compensation on...
  5. A

    Fitting wall lights with side cable access

    Hi all, I am planning to install wall lights such as these ones (LAP Bronx Outdoor Up & Down Wall Light Black - Screwfix - https://www.NoLinkingToThis/p/lap-bronx-outdoor-up-down-wall-light-black/8627r) off an existing wall light by connecting them with a SWA cable clipped on the wall. However, I...
  6. P

    Should this fitting be bonded to earth

    I have had these lights installed by a contractor whose work is normally very good. He has not connected the earth in each fitting as there is a class 2 sticker on the metal back plate. He argues that it does not need to be earthed. The manufacture did not supply a bolt for the Earth terminal...
  7. I

    Will LED Bulbs have a shorter Lifespan in a Light fitting designed for Halogen

    Hi we are replacing light fittings in our home. Im confident with the fitting aspect, but have run into doubt in making the right choice of fitting.The one we like says it recommends G9 Halogen bulbs Buy Clear Drizzle 3 Light Flush Ceiling Light from the Next UK online shop -...
  8. K

    No flex earth only fly earth in metal light fitting

    Hi, I do basic electrical DIY like changing light fittings and have got a light to put up that only has a fly earth and no flex earth (see pic). I’ll be buying a junction box but just wondering why I’ve no flex earth? Do I just use the fly in the junction box alone? TIA
  9. O

    Wylex 3 phase board fitting.

    Do I need any more than this to fit the above board, does it need a fitting kit for the switch or anything extra to get it up and running (tails excluded obviously)
  10. O

    What method do you use for fitting consumer units

    I was just googling for skeleton boards after reading the last thread and various pictures of consumer units popped up, some wired terribly and others that look like a work of art. But for me to get it looking even half neat I have to strip everything out of it so its just an empty box, strip...
  11. B

    Fitting new Cooker hood

    Hi My Kitchen has never had a cooker hood installed. Where the new hood is going to be situated is some distance from any of the outlets in the kitchen ring main. However there is a cable coming out of the wall near where the hood is going that was originally intended for one of a pair of wall...
  12. Sparksflyallover

    Light fitting question

    Hi What do you call the black bit on this picture please. And where can I order one from. Thanks in advance.
  13. T

    Fitting an LED Spot into a loft hatch?

    I'm looking to consider asking my electrician to fit one extra LED flush-fit spot in loft hatch so it matches the rows in the ceiling to a total of 9 (3 rows of 3). He's concerned that it won't be safe and I totally get this, but is there a way to install this with some form of strong, flexible...
  14. N

    S15 light fitting replacement

    Hi, does anyone know where I can buy a replacement light fitting like the one in the picture? It takes a s15 bulb 284mm and the length can be no longer than 32cm x 6cm wide and 5cm depth, I was wondering if I could just buy the end caps and replace them but can't find anywhere that sells them...
  15. H

    Class II fitting modified by Electrician

    Hi all, Disclaimer: I'm not an electrician and have very basic knowledge of electrical installation. We've been putting in a new kitchen into an apartment over the last couple of weeks and had a bit of a nightmare with the electrician. The firm is well rated and the guy we initially spoke to...
  16. S

    Help fitting a new ceiling light

    Just replacing a ceiling light and could do with some guidance on sorting out all the wiring. This is how it was: And the light is expecting just the 3 wires: Wondering what's the best way to tackle it. I could do with removing that block in the ceiling altogether and somehow having just 3...
  17. banny07

    Fitting Isolator in Meter Cupboad

    Consumer unit is being moved 10 meters away from outside meter cupboard which is mostly occupied by economy seven timer thing which customer don't need anymore. My question is can it be removed and install fused isolator in that space?
  18. sebastianvirlan

    Fitting new socket in the bedroom

    Hi, I would like to add a new socket in the bedroom. Current room configuration: 3 existing sockets - wiring coming from the bottom (under the floor) master fan - wiring coming from the attic 2 light switches - wiring coming from the attic To legally, in respect to the UK regulations, can I...
  19. J

    Reinstall sauna light fitting

    Hi there, does someone know how to reinstall this sauna light fitting? Please see photos attached. Any guidance would be much appreciated.
  20. L

    Anyone fitting Wireless AJAX kits ?

    Ive got a project for a client and they like the looks etc. heard NOTHING but good about them etc .But tend to fit Texacom .

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock