fused

  1. Raptor0014

    Is this a fused neutral cutout?

    I’ve not seen one of these before and i have a memory of them needing to be upgraded by the DNO. Just wondering as well what the BSEN is for it. Is it 1361 or 88-3
  2. H

    Fused spur tv connection how to disconnect

    Hi I've tried some intense googling on this subject but I think I have the terminology wrong and also don't understand it so can't get an answer. Years ago an electrician installed a wall mounted TV for us and cut the plug off the TV connecting it into the wall I believe via a fused spur (?!)...
  3. M

    Three 2.5 t&e feeding a socket and a fused spur

    I'm revamping the kitchen electrics, 1980's property. Majority of the sockets have a couple of cables going in/out of them, with the only exceptions being a couple of sockets tee'd off fused spurs and fed by single cables. However, I'm perplexed by one area. By the side of the gas hob there was...
  4. C

    Fused Spur for Combi Boiler from existing spur on bedroom?

    I'm sure this question has been asked to death, so apologies! But just wanted some direct confirmation that my intended wiring setup is going to be completely fine/not fine. I'm currently planning on having my combi boiler relocated to a kitchen cupboard prior to a kitchen remodel. There is...
  5. R

    Can I install a new light switch from a 3amp fused box

    Want to install a new permanent fixed wire light into a 3amp box. Box has my new combi running from it and that's it. It's a wardrobe cupboard where the old hot water cylinder lived. Box is wall mounted and 3amp fused. If I ran a 1.5mm twin and earth from it to a new light switch and then...
  6. N

    need for a fused switch for boiler / and boiler earth cross bonding

    hi there as i write this i realise i have 3 interconnected questions about fused switches; two relating to my boiler (hope its not to cheeky to ask 3 questions all in one go :-) ) Question1: i have a radial circuit 1.5mm cable on a 6amp fuse from my consumer unit straight to the boiler where...
  7. R

    Fused fuse board no rcd or breakers eicr rating

    Hello I live in a rental in scotland and have recently had an EICR carried out. I have an old fuse wire fuse board on a wooden plate with no rcd or breakers, I had assumed this would be a C1 or C2 but this came back as a C3. Surely this is incorrect if the plastic fuse boards are C3s surely no...
  8. H

    Wall lights 5 amp fused spur

    Hi. I wanted to run a 5amp fused spur from a nearby socket but find its already a spur ( only one cable in). Help please.
  9. K

    Bg weatherproof rcd fused spur

    Hi guys I installed this unit protecting a shed for a customer a while back and he’s text me with images showing the fuse burnt and it’s holder melted. All connections are tight and no moisture inside. Any ideas why? Also I’m hoping to replace this spur with a more reputable brand within its...
  10. J

    1.25 flex of a 13 amp fused spur feeding a 3KW immersion heater

    How tight is it running 1.25 flex from a 13 amp fused spur feeding a timer for an immersion heater?
  11. gm1984

    UK 16a oven on 20a fused spur from Kitchen ring main

    Hi, I've just bought a new built-in 3.4kw oven = 14.8A @ 230v. I'm getting 245v so actually 13.8A. Existing oven plugs into single socket fed from 20A DP switched fused spur. Ring is small (3 double sockets) with 4 x 20A DP switched fused spur single sockets (oven, washer/dryer, dishwasher...
  12. A

    Fused switch with two feeds but no load?

    Hello, I have a 13A fuse switch in my airing cupboard that has never done anything. I thought maybe years ago it was for an electric shower but there was no wiring in the bathroom when I re fitted it so can't be that. Upon opening the switch there are two sets of wires, 2xred(L), 2xblack(N) and...
  13. M

    Fused Spur 190v between Earth and Neutral ??

    Hiya Guys, I have a gas central heating boiler that is not switching on at all. It's connected to a clock timer and then to a fused spur. Boiler technician was out today to say the boiler is fine and I need an electrician, hence this post ! He said we have cross polarity on the fused spur. He...
  14. B

    Fused spur burn out

    Any thoughts as to why a fused spur connected correctly would burn out and melt the unit? Surely if it is pulling too much current (which is possible as it was feeding a socket used for car charging) the 13amp fuse in the unit would have blown before it got too hot and melted.
  15. K

    Fused switch to tumble dryer connector issue

    I have had a new kitchen 3 months ago and the new integrated tumble dryer stopped working. No power, nothing. It is under warranty so an engineer came out and fixed it. He said that the plug has been cut off and a three pin push fit connector is in its place. He replaced the cable and plugged it...
  16. Msitekkie

    Why does RCD trip when fused spur switched on

    I was called out last night to an RCD trip issue. I found that switching on the fused spur to the washing machine would cause the trip & I could only reset the RCD after switching it off. Straightforward up to that point, but after unplugging the washing machine, then disconnecting the spur...
  17. T

    Trendiswitch fused spur - no earth

    Looking to replace 3 fused spurs in the kitchen - have bought Trendiswitches as love them and gradually replacing all the old electrics round the house with them. First time I've looked at a fused spur, took off the old one, with an earth each side, the Trendiswitch is not earthed? Can I...
  18. T

    2 fused spurs connected - why?

    Hi... I moved house fairly recently and I'm slowly uncovering 'quick fix jobs' all over the house from paint, render and now electrics.. I came across some electrics in the garage and I'm curious to know why they've done what they have and is it correct in any way, shape or form (and safe?!)...
  19. L

    Fused spur for under counter socket

    Hi, I'm currently looking at moving a socket so it's under the worktop for a washing machine in the kitchen, however I need to be able to switch off the socket. Am I right in thinking that I need to fit a fused spur above the worktop in order to do this?
  20. P

    7A fused plug

    While visiting some friends down south I noticed they still had the cardboard wiring info on their coffee maker, so removed it as not for final use. What was curious is it specifies a 7A fuse, and while I have seen and used some odd ones before (e.g. 1A, 10A) this first time I have seen on...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock