getting

  1. J

    NICEIC Certification Scheme Getting accredited to

    Looking for some advice regarding joining a CPS. I've been in the electrical industry in various roles for nearly 10 years. I started my electrical education back in 2008 when I completed a level 2 qualification and picked it back up in 2016 gaining a level 3 C&G followed by inspection and...
  2. timhoward

    Getting very difficult to use this place!

    My observations: The "Home" link says recent threads but doesn't seem to be recent threads. On a phone this used to be an easy way to get back to the list of forums, now it involves two taps to menu, and Electrical Forums and a tap to close an add. It's also sadly the worst it's ever been for...
  3. M

    About ibew interview

    If my ibew interview was short does it mean i have improved chances of getting in?
  4. I

    Seeking advice on getting side jobs as an Electrical Engineer for Buildings

    I am an experienced electrical engineer consultant in building services, and I am looking to expand my professional horizons by taking on side jobs during weekends or bidding on new projects. With 5 years of industry experience under my belt, I feel confident in my abilities to deliver excellent...
  5. R

    Would you advise getting all the GN publications or is OSG + 7671 + GN3 enough??

    Just like the title really. I like the thought of getting all the guidance notes but is it worth it or would a copy of the aforementioned books suffice?
  6. E

    Why is one plug getting hot and the other isn’t?

    My Tesla UMC plug gets extremely hot and then defaults to the max output of 5amps after about 20 mins. However, I tried my brothers Tesla UMC and it stays cool at 10amps for hours on end. I mixed and matched the plug adapters to the module bit, and diagnosed that it is defo my plug part of the...
  7. T

    A headache getting clarification re Solis inverter

    Hi all. Having a real headache trying to find out further details in regard to connecting a MODBUS smart meter to a Solis 5kW S6 inverter, Model S6-GR1P5K. Apparently, there are a couple of different versions - a 'Meter' version and a 'CT' version. The manual states that you must get the...
  8. O

    USA Getting strange reading when I test a recepticle

    I have moved back to my house i was born in some 60+ years ago. Most of the original house's electrical receptacles are 2 prong with the center screw that holds the cover plate on as ground. They all test, OK. My parents had an addition installed on the second floor sometime around the mid to...
  9. impish15

    Getting 10v on Steel Capping

    Hi All Recently bought a wandering lead and was practicing with it on a few of my relative houses checking if metal sockets / fittings / appliances had continuity etc and also checked 0v on some of the fittings. Couple of items with no continuity (CPC popped out at the back so re-terminated)...
  10. Oliver123

    UK Baby Belling stove 1972 tripping power when getting warm.

    Hi, I want to restore an old baby belling stove/oven and it worked at first but after about 1min it tripped the power. After that, it trips the power immediately when trying to turn on. The two elements on the stove did this, the grill and even the oven. What is weird is that when I leave it for...
  11. A

    UK PV Off grid setup getting a grid connection

    Just hoping to pick someones brain here: Customer has an existing off grid PV install to a barn He is now building a house on the site (this will include a fast EV charge point) He has a 3 phase grid supply available, with the intention of running/ exporting the barn on one phase. the house on...
  12. A

    Plug pin getting warm

    Hi guys Recently I've had a wall paper steamer plugged into my upstairs ring main and noticed after several minutes a fishy smell which was the result of a burnt out live pin in the socket. To add add main breaker did not trip at this point or even the plugs 13amp fuse (could you advise as to...
  13. robd

    Getting new MFTs any recommendations please

    Hi All, Have decided to replace my Megger 1553 MFTs after 12 years, batteries don't last long and there are a few foibles with them and I've had enough so criteria as follows: Must have rechargable battery pack Needs to be able to test A type RCD test facility Not bothered about linking up to...
  14. banny07

    UK I am getting very high zs readings

    Hi Guys. When measuring zs I get very high reading. Ze is 0.3 (tns), zdb is 0.21. r1 and rn are is 0.42. r2 is 0.72 , r1+ r2 is 0.29 . when I test zs it 8.26 ohm new to testing. I even buypassed rcbo but it stays same. Do you think my mft if faulty? Any thoughts guys? I am new to testing.
  15. HappyHippyDad

    Getting paid by OZEV!!

    Is anyone else having a ridiculously long wait to get the OZEV grant for EV installs? I did my first EV install in July and have still not been paid the £350. The install has been accepted but the payment team keep saying they are waiting for OZEV to send them a vendor number!! Bloody...
  16. ksemmler

    Getting meter data remotely

    Hello, I am not very much familiar with interfaces and communication protocols and I am trying to get data from several meters to read it remotely (in a sort of experiment). The meters have an M-Bus interface to a Data-Logger. The Data-Logger has the following interfaces/protocols: To the...
  17. ksemmler

    Getting meter data remotely

    Hello, I am not very much familiar with interfaces and communication protocols and I am trying to get data from several meters to read it remotely (in a sort of experiment). The meters have an M-Bus interface to a Data-Logger. The Data-Logger has the following interfaces/protocols: To the...
  18. Dobbo97

    Getting into electrics

    I currently work full time Monday to Friday on a shift pattern, I’m 24 years old and have bills to pay and a child on the way. I’m looking for a career I can work hard in and progress as I go on. But I don’t know how to get into the electrics trade, do I go to a local college to get...
  19. I

    No bonding, no work getting carried out?

    Evening all, My NIC inspector told me years ago "if there is no bonding in place, you're within your rights to switch off the electrical installation until works have been carried out!".... not sure if this is true? When asked by a customer to carry out a job which you give a cost for before...
  20. littlespark

    Getting into the dark arts of EV charging

    I was just looking at EV courses last night and came across the NICEIC one that would be held in various venues, one being fairly close to me. I am not registered with any scheme at the moment and thats something else im looking into, but so far not needed to be (in Scotland, no P to bother...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock