highest

Recent contents Top users
  1. T

    Highest Wattage Panel You've Seen

    Whats the highest wattage panel you've seen? and by who if you can remember? seen some Chinese ones at 400w and wondered if any of more well known ones have bigger output than 250w or some in the pipeline for release at future date. Might help for future planning.
  2. S

    Shower Basin

    ok guys page 202 in BGB illustration (c), if there was a fixed shower head close to the 2.25m zone limit whats the score with a recessed ceiling light? how close can you have the shower head to luminaire? only ask as i saw this round a friends house recently. cheers
  3. J

    PFC Testing

    Hi all. Just a question which seems to get me a bit confused about PFC testing. I understand that the value of PFC you put on a EIC or any other form is the highest value of either the PSCC or the PEFC. Now when you get the reading on your meter (which is sometimes displayed with the Zs value)...
  4. F

    Help needed with 3 phase Ze

    Hey can anyone help, I've got a EICR (Periodic inspection) tomorrow and just been told its a 3 phase supply. Am i right in thinking i just do L1-N-E, L2-N-E and L3-N-E then take the highest reading, also is it the same to get PFC????
  5. 1

    What's the highest you've recorded for a 100A fuse?

    Yes Maximum Demand again lol I just tried to make the title a little more curious to get people to look ;) Just playing with some maximum demand figures, started with 226A and got it down to 104.65A Just wondering what id the highest figure you have recorded for a 100A fuse? Is it actually...
    • 1shortcircuit
    • Thread
    • aus demand fuse highest lighting lights maximum recorded what's you've
    • Replies: 10
    • Forum: Australia
  6. F

    Ipsc and Ipfc at sub distribution board

    Hi, Hope someone can help. I need to test the prospective fault current at a garage distribution board (i.e. a sub board) but the no trip function of my tester will not work and trips the RCD which serves the garage circuit in the main board. As I understand it, the figure to take for...
  7. K

    Prospective short circuit current test

    Hi all, fairly new to the forum so youll have to excuse my 'noobiness' as they say. I just watched this video of a guy showing how to carry out the above test. Prospective short circuit current test - YouTube This is taking place on a 3 phase supply. Does anyone know why he doubled the value...
  8. VoltzElectrical

    testing R1 + R2

    When testing R1 + R2 on a three phase circuit, do you connect each phase in turn to earth and test at other end? Record the highest value? Similar to what you test Zs on 3 phase but without the connecting? Cheers all.
  9. D

    Zs testing

    Hi I have just tested the Zs on my ring final circuit... i got the readings 0.25, 0.32, 0.47 and 0.52 there are more but the readings were basically between 0.25 and 0.52 Ze is 0.11 and r1+r2 is 0.35 i get the same readings either at the front or the back of the socket so with the test...
  10. J

    pfc testing

    hi all, i have carryed out a pfc test at collage! i am confused about useing the 2 or 3 wire test. i have read that u put the megger on pfc high and test between L incomer and E with all earthing connected. but i spoke to another spark last night who said u need a 3 lead test to test between...
  11. B

    prospective fault current

    on electrical installation certificate at the top under supply characteristics it asks for (next to single phase) a prospective fault current in KA How do i measure this reading please? Thanks!
  12. S

    R1+R2 and Zs - Don't know where the light circuit ends!

    If you genuinely can't tell where a lighting circuit ends (due to the way in which it has been wired) I presume you would test for R1+R2 and Zs at every point and then record the highest reading?
  13. M

    continuity of 2 way lighting circuit and more

    hi guys ive my 2392 test tomorrow , ive a few thing to ask to be 100 per cent about all continuity of 2 way lighting circuit , at the celing rose do i test between live and earth or switch wire and earth and then turn switches on and off , do i need to open the switches to check between...
    • mally4601
    • Thread
    • 2 way aus between circuit continuity earth highest insulation lighting lighting circuit reading
    • Replies: 0
    • Forum: Australia
  14. S

    Continuity of cpc's on lighting a circuit

    Hi guys, I have got a pretty basic question to ask, but I just want some clarification please. When testing Cpc's (R1+R2 method) on a lighting circuit which line conductor are you supposed to probe in the ceiling rose? Is it the supply line, the switch line or the line out to the light bulb?
  15. telectrix

    1 circuit?

    hi, guys, slight confusion here, installing a lighting circuit in a barn. job is likely to be used for assessment so it's got to be spot on. Coming from 10A MCB in 1.5mm to 2 gang switch, one switch for each of a bay of 4 x 6' twin fluorescents ( both runs in 1.5mm ). Done the cable calcs no...
  16. B

    Prospective Fault Current

    Hi guys. I just got the results back for my AM2 and I passed everything except the PFC. I now need to go back and do the whole testing proceedure again which I am gutted about. When I tested the PFC, I don't think I had three leads from my tester, I seem to remember only seeing two leads...
  17. O

    suppliers cut out fuse

    Guys did a consumer unit change over the weekend and hit 2 snags 1. The suppliers cut out fuse has no markings on it ie no BS 88 60 amp instead the unit is black with no markings on it so how to I id it for the cert. The property is a 3 bedroom 1950s flat TNS supply. 2. Maximum demand I...
  18. J

    pfc on 3 phases

    when prospective fault testing a three phase circuit do you only need to do the short circuit test only on the 3 phases in turn due to result being twice that of the earth short circuit current due to the line voltage being twice the value?
  19. 4

    Testing ring main with a spur

    Hi currently at college doing level 3 testing and inspection just a few questions if anyone can help For the Ring circuit it is all wired in 2.5 singles and has one spur off the the ring After doing end to end tests is the calculation r1/2 seen as though the cables are the same size? Also if...
  20. B

    pfc testing

    can any body give me the reason why when testing pfc and pefc at a three phas DB why do you have to test all phases to neutral then all phases to earth why not just one phase surely there will be very similar results if not the same just thought iwould ask cause it was buggin me..

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock