Hello guys/girls
first time here. I have a problem with an LG TV and I want to fix it myself.
I bought a multimeter and I was advised to check the T con.
If I run over the different components. I arrived at this conclusion
LED: not causing the problem since I have a faintly lit screen...
I recently done wiring for 4 channel CCTV with NVR. So i Install each CCTV with Cat5 Ethernet cable with 12VDC power supply. I connect all the CCTV with ethernet cable to NVR and start running the system without internet and work fine till few weeks. Few days ago i encounter one problem is...
What wound anyone recommend to repair the exposed single insulation from the thermo plastic conductors on x14 electrical meters?
Code 2 on EICR due to storage of goods in a large room might bash into the basic insulation and cause a gigmatic explosion.
Is there an insulating material to use?
This popper up on my twitter feed tonight, shows a house gutted in Greater London from fire due to a consumer unit fire.... Make sure you double check your terminations and installs and it can almost always be avoided if you do things properly.
Hi,
I’m making a training tool/website to help people learn about engineering, but I’ve got a bit of a problem. I was working on 3D model of an engine and labelling parts etc. but there is one piece whose function I do not known (see below image).
I’ve asked around but no one I know seems to...
Hi, I have a question, I don't have any experience with electrical stuff but I would like to know if can I connect wall led light like this without connecting it to the wall cable system, for example keep it fixed on the table etc while it's being plugged into a socket, and in that case I guess...
Hello
Its Scott ive just joined. I want to post a question but I don't understand how to inset a photo of my boilers wiring diagram. When I click image it say image URL. What do I do.
scott T
Thread
advise
hello
image
new
option
picture
upload
welcome
Hello everyone,
A few years ago now I set off on my course to join the ranks of you fine gentlemen. Enrolled in college did my 2330 lvl 2, happy days, started my 2330 lvl 3 got half way through and some things aside from work derailed my plans a little. Anyway this year I picked up where I left...
Hi, I've come across a system with no apparent main fuse. The supply comes into a metal hinged box with the words BIG Ltd on it. This is boxed inside a cupboard so I can't open it or tell if it is sealed. The tails then come out to the meter and into a double pole connector block. This...
Chector
Thread
fuse
image
main
main fuse
metal
option
paper
query
upload
Hi
ive been asked by a couple of different clients to take thermal images of distribution boards, this isn't something I've done before but interested in undertaking it, I know the camera starts at £1k but it's the report which I'm curious about.
is there an industry standard for the layout...
Hi everyone,
I have a forklift charger, it's plug has 4 flat pin and 3phase power 250v 30A rating(written on the plug).
Upon checking it seems to be a NEMA 18-20 type, I cannot find this socket in my country and planning to rewire it to NEMA 10-50.
What does the meaning of W X Y and Z...
Got this today by email:
Congratulations xxxxx. You've got it.
Your Business
We've been told you've got what it takes to become a Which? Trusted Trader.
Dear xxxxxx,
We're delighted to let you know that our members have recommended xxxxxxxxxxx to join our Which...
Hi, I've just started an apprentice course so very green but I've been faced with this issue and can't work it out.
Two way light circuit in a garage each controlling 8 x 70w fluorescents. I've never seen a two way wired this way and need help understanding it. Each switch is identically wired...
Lorryload
Thread
2 way
brown
circuit
connected
image
problem
switch
Hi,
I've 26 MR16 12v downlights in my property. At the moment they're running 50w halogens, LED's would obviously be the more efficient option.
I think I've got a pretty solid plan for converting but I'm hoping someone will be able to point out any glaring omissions :stooge_curly:
Currently...
Not had much experience with telecoms so hopefully someone can shed some light on this for me.
I need to wire in a master socket in my property.
I've never come across this cable before, then again I haven't had to deal with many.
Hopefully you can see the image, it consists of
3 yellow...
The DNO earthing on a TN-S supply to the MET block is no more than 6mm. On the customers side the Main earthing from CU to MET is in 16mm and the bonding to the Gas and Water is in 10mm.
The Ze readings are low at 0.13, is there a requirement to get the earthing from the MET to the supply head...
Great - just got a letter from a company called Getty images saying I owe them £879 for one poxy small image that they claim to own that is on my website. They say going to take it to court. WTF?
Is this a scam?
Anyone else experienced this?
:90:
what does everyone think of this?
Handheld Video Optic Inspection Tool with LCD Display : Inspection Cameras : Maplin Electronics
It says it only has 88cm of lead from the camera lens to the screen, but would this be enough?
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.