Hi All,
Kit is Solis RHI 3.6k 5G inverter and two LG Chem RESU 6.5k combined with an LG RESU+ box, which is a CAN comms gateway and busbars. I have my SoC clip set at 20% with a grid top-up at 10%. The inverter ignores the 20% limit and regularly drops the batteries to 10%, which halves their...
I thought I had an understanding of how to size an inverter but I think I have become slightly confused after taking to some proposed installers. I am looking at a 15 panel solar array with a proposed output of 6150KWH and was thinking of having two 6.5KWH batteries that would have their charge...
I live in the Philippines where the power is bad, we have constant outages and when it does work the voltage ranges from 160-255v and the hz ranges from 52-65.
I had a UPS which I had replaced the battery with a bigger one but it finally blew up and now I have nothing as a backup and before I...
...Replace it with a connection to a ground spike via the heat sink.
The 1.5kW GTI has no off grid capability.
This separates the house PE from the inverters but is it the right thing to do?
New to the forum, this is my first post.
I have an old sunnyboy 1700 and I'm trying to connect it to a 1kw wind turbine. I've been told that if I can get into the inverter software to change parameters (mppt) then it may well work. Has anyone any experience of this, or does anyone know where I can obtain a usb cable/interface for the job?
Good Morning All!
Always appreciate reading the great ideas and conversations in the forums, and now actually have a chance to ask a question!
We’ve got an existing PV system for our house which was installed by a local Solar company. System today looks like:
34x LG335 Panels
Enphase iQ7 Micro...
The idea of having electrical power from 240volt AC sockets in a sectional building not on the national grid is becoming popular among those who want to live in a tiny house. Is it possible to connect somehow a used lithium ion battery from a Two seater Smart Car to an inverter? Then to connect...
Martin001A
Thread
battery
car
connect
inverter
lithium
possible
smart
Hi, I'm new here and looking at this True Sine Wave Power Inverter from AliExpress, but I have never seen any inverter without a transformer?
How do they work without one, and how does this one's build look for a cheapish China one? (£125)
As I'm not abele to spend much money as it's to power a...
Evening
Does anyone on hear know how to install the LoRa Wireless RS485 transmitter and receiver pair with a Solis hybrid inverter ?
I’ve been told it’s compatible just insure how to install it.
Can anyone help ?
I have one 1kw single phase and one 5.5kw 3 phase inverter to drive 2 motors.
As the installation is in proximity to 2 smart meter, I'm thinking about the installation of a noise filter. Both motor driver will be switched by a 3 phase contactor.
Does the filter makes any sense , if a 3 phase...
Hi I have a solar system on the feed in tarrif, my inverter is playing up, if i get a new one fitted will the FIT people be able to know if I have a new inverter, does a serial number get fed to the generation meter electronicaly.
I have heard I have to inform my electricity provider if any work...
Hi, I have nearly finished installing my first solar system for my brother in law. havent installed a DC isolator on the string lines (none in stock locally and didnt order ahead). The sofar inverter he bought has a rotary isolator fitted already.
Can I label that isolator and be compliant...
Hi. I am going to have a solar power system installed and it will include a 13kW battery and a Zappi charger to use with my electric vehicle. The Inverter is spec'd at 3.6kW, which I think is consistent with what the grid will allow. I've been looking into now many solar panels to have and...
I am working on putting a victron 24/3000/70 inverter/charger in my sprinter conversion van. Output of inverter is 30 amp pass thru with power assist. Power assist uses the battery pack to boost the 30 amp to up to 50 amps if needed for larger loads. They suggest 50 amp ground fault breaker...
I've been asked to fit a Growatt spf 5000 es inverter which will have batteries (not sure what yet) and tied to the 230v domestic mains supply. Although I'm qualified to fit pv systems, I've never actually fitted any battery systems so not sure how they work in relation to connecting to the...
I have built a campervan and am keen to avoid propane - preferring to use an induction hob.
But it is giving me some issues.
I have 610w of solar on the roof and use a Victron mppt charger (set to spiral) to charge 2x brand new Leoch 110ah AGM leisure batteries wired in parallel.
I bought a...
I recently noticed that my array is no longer outputting anything to the meter or grid.
Managed to get access to the inverter today and Sunnyboy SMA4000TL is alternating the following messages. "Device Disturbance" and "restart in 300s" [counting down in 10s intervals].
Nothing seems to...
Looking for a bit of advice before I go for one or the other.
I can only fit 8panels 400w (maybe 9) in my roof. No room to expand. So I am locked to that system. Also looking to get an eddi for the immersion.
There's a difference in price of 900eur.
Would I just be alright with the Trannergy...
Hi.
I live in Kurdistan(iraq). I bought these four devices from the United States:
@BLENDER: 120V, 50/60Hz, 12A
@food dehydrator: 115V,50/60Hz,600W
@food dehydrator: 110V, 60Hz, 1500W
@Vacuum sealer: 120V, 60Hz, 1.06A
As you know Iraq's power is 230V-50Hz, So I have to change the voltage...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.