leave

Recent contents Top users
  1. M

    UK Pinched wire (but copper not exposed) - leave or fix?

    I'd taken a socket faceplate off to do some decorating but after putting it back, the MCB was tripping and tripped every time I tried to reset it. After taking the cover back off (wires still connected), it didn't trip. Looking at it - maybe one of the wires was getting pinched by a screws - it...
  2. EricMark

    How long to leave a battery on charge?

    With a smart charger and 5 out of 6 batteries I want to keep in good order it is a case of clip and charger and remove again one or two weeks latter. Using an energy monitor on supply to charger it is clear as the battery charges it auto turns off, however I have one odd one out, a 95 Ah battery...
  3. M

    UK Advice on testing RBOS in prison

    starting to test in a prison. does anyone know why the rcd trip test does not work when done directly on to the rcbos
  4. D

    NICEIC Certification Scheme Terminate NIC EIC membership

    HI - I am currently registered with the NIC EIC - Domestic installer, which also includes the Part P certification. I am muling over the idea of terminating the membership, but I wish to remain Part P registered in order to still practice legally. Is this possible and how do i go about it...
  5. H

    Hazardous Old Wiring...??

    I’m a new homeowner and found this old wire in the panel (the red and black one)... It’s on a 60 amp breaker. It is clothed sheathed outside the panel and is freying in parts (see 2nd photo)... Hazardous? Thanks for any advice!
  6. M

    Leave existing ceiling rose within new metal light fitting??

    I'm your average DIYer and after advice about replacing a pendant light with a new flush metal fitting. I can fix the new light to the ceiling and the existing rose sits within the void of the new fitting without any clearance issues. Is it OK to leave it in place and wire the new fitting into...
  7. MDJ

    Britain Leave the European Union (Please be polite with other people's views)

    Lets get on with it, Hard Exit, Hard border in NI, Patience is running out now with the Europeans, we voted to leave although some of us didn't, however we got to get out, I think all this farting about is causing havoc, lets get out now!!!!!
  8. Dan

    Update: Forum moved to new server and being tweaked

    Okay, So we've been running with various bugs for ages. The transfer was long overdue. We've done it now, we're fully on the new server. I'm tweaking the forum now and fixing the bugs so give me a couple of days before you start to tell me what's not working etc please. :)
    • Dan
    • Thread
    • being leave moved new posts replacement server update upload
    • Replies: 29
    • Forum: UK Electrical Forum
  9. O

    Change it? Move it?

    This photo shows an Icon 15 which is just outside zone 1 above the shower. The fan is 230v - would you recommend its moved/changed or leave it as is? Thanks
    • Octopus
    • Thread
    • attach being change leave shower
    • Replies: 7
    • Forum: UK Electrical Forum
  10. kingeri

    100mA RCD on PME system

    I am going to a job this afternoon, new shower circuit. I noticed yesterday that the Wylex CU has a 100mA S-type RCD as the main switch and all the circuits are on 30mA RCBOs. PME system as far as I could tell (certainly not TT). Didn't give it much thought then, but was thinking about it...
  11. Marvo

    Please Explain The Lack Of Brexit

    Is the UK leaving the EU or not? I see court cases, I see votes in parliament. There's talk of a hard Brexit, a soft Brexit, Scotland says they're not allowing it...... Wasn't there a national referendum with a clear majority or did I miss something? Seems like a lot of smoke and mirrors to me...
  12. Pete999

    Pete's Videos Must have been asleep

    Must have missed the lecture on safe isolation
  13. B

    110v pat testing adaptor wiring

    What is the correct way to wire up a 110v pat testing adaptor
  14. gutterball

    People who don't leave details.

    So I have just come home for some lunch, and I have a message left on the phone. Nearly 3 minutes of rambling message as to how his sockets don't work, and could I come and look at them. No address or number. Tried 1471 number withheld.
  15. HappyHippyDad

    Leaving a puppy in van whilst you work?

    Evening all. I have just got a puppy labrador, he's 10 weeks old and I've taken a week off to spend a bit of time with him, but I need to get back to work. The idea is for him to come out in the van with me and I just wondered if anyone else does this and if they have any problems? Cheers guys.
  16. E

    Is it safe to leave a convector heater, auto overheating cut-out, on 24/7 unattended?

    Many of my items have failed recently and as my gas central heating boiler is 20 years old, I am concerned about that failing too, although it works perfectly at the moment. I occasionally go away for a week and in addition to leaving the gas central heating on at a low temperature, I am...
    • electricans_son
    • Thread
    • arial auto heater heating leave overheating safe
    • Replies: 18
    • Forum: DIY Electrical Advice
  17. P

    Isolating a lighting circuit

    I'm currently minding our neighbour's house and animals whilst they are abroad for a month. The kitchen lights are suddenly causing the downstairs lighting circuit to trip. When I reset the switch all other lighting, lounge and hall work ok, but if I try the kitchen lights then the circuit...
    • pugsley
    • Thread
    • circuit isolating kitchen leave light lighting lighting circuit switch
    • Replies: 2
    • Forum: DIY Electrical Advice
  18. E

    Domestic - Best way to leave temporary power during rewire

    Hi all, apologies if this has ever been answered before, i only have 2 months post apprenticeship experience(i went travelling immediately after qualifying!) and about to start back in the trade as a mate. Something i have often wondered since i never done many domestic installs during my...
  19. C

    Finish Training Soon Need Help

    Hi, im 23yrs old will Have gained quals in 2356 Level 2 + Level 3. Test inspection and 17th edition by the end of this year. Am currently working as Maintenance Engineer, gaining very little install Experience lately, although i have had abit in the past. Can anybody advise on the best ways in...
    • Chrishands
    • Thread
    • business company experience finish leave need help training
    • Replies: 10
    • Forum: UK Electrical Forum
  20. E

    Advice - Does it ever leave you?

    Hi folks Looking for some career advice. I am 17th Edition electrician with ECS, however i only have 3 months post apprenticeship experience gained 6 years ago. Long story short, i left to go travelling, dabbled in too much of a rock n roll lifestyle, became unwell and got signed off. Im ready...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock