I’ve installed several outside lights I need to make another cable join in a junction box and then fix it to the wall outside the problem I have is i’ve run out of the junction boxes I was using I do have a standard one the plan is to use the standard junction box I have in stock and insulate...
Hi, looking at wiring some outside lights with PIR and manual override, what options do I have? As to the manual override can I have one switch for either sensor or perm on, or can I have sensor or off, has anyone got any drawings and are there any others ways thanks
How do folks wire in a PIR controlled light with an over ride? Is it a case of fitting a completely seperate PIR and controlling from two switches .. one permanent live on and off and one to PIR? Any neater switching methods?
Hello, after changing all the light switches in my house from old to modern, I am now left with the tricky one that I can't work out.
- I have a light in the passageway operated from two switches (two way)
- I have a light outside (sensor) operated from one of the two passage way switch (two...
Newbie here
I have just bought a sensor led light that i wanted to replace outside light. There is a 1 way switch on internal wall
I've just tried to do it today and ......
And cannot get it to work
1. Old fitting worked with neutral, live and earth connected with a connecting block
2 Took...
Hi, is it a requirement to run an earth wire to outside light(although its double insulated) or is it probably just best practice ? I was replacing my son,s existing outside light on a new build house with a pir security light but found there was no earth to his existing light. Thanks
As the title says changing light because my PIR one stopped working.
On my new light I have a terminal for brown a blue an yellow and green.
The wires coming out from switch is briwb , black, yellow and green and a gray one.
They go to a double switch inside ,one for the light and one for...
Hi
I have an led flood light just above the door on my shed. I went out to the shed tonight and as I switched on the LED flood light I noticed that it was acting out a strobe light effect. I switched it off then on again and it was strobing again...
Anyone ever experienced this before and if so...
Hi guys, quick introduction, I am only qualified as a domestic installer, not a full sparky. My company builds bespoke garden rooms. We have been asked to supply an outdoor dining room for a client and they are extremely keen on having the consumer unit and under floor heating controls on the...
Hi all.
New to the site and hoping you can help.
I've been asked to fit some outside lights (x3).
Having trouble getting a supply without chasing cables etc.
Is it possible to use an existing fused spur for the supply?
I'm thinking fused spur to new switch then out to lights!
Do I need an rcd or...
Just wondered what people's thoughts were on the use of 16a 230v ip44 plugs / sockets used on cable lighting for a Christmas event with most connectors being left on wet grass or leaves, there are lots of these connectors in use and are accessable by children as it is a public area.
My thoughts...
Hi looking at the quinetic range, never used it before, if I’m switching two different loads do I need two receivers as I’m looking at garden lighting but want a 2 gang switch so one side of the garden switches on with 1 switch and the other side of the garden to switch on with the other switch...
I have some 20mm black pvc conduit fitted outside for data cables. Should the inspection covers on the inspection bends and elbows be on top or underneath to be waterproof?
Hi all,
Just a quick question. Would a new installation for an outside light require an RCD switch if there is no RCD protection at the CU? The cable will be clipped direct to inside of porch wall.
Thanks
Beeg
Hi all,
Hoping someone will be able to give me a bit of advice.
I’m planning to install a PIR light on the outside wall of my porch to light up the driveway. There is currently a light inside my porch which I am planning to take the feed from, run the cable along the inside of the porch and...
I've just moved into a new house which has some outside lights fitted in the back garden, none of which are working. There's a wall mounted junction box which I opened to see if the supply was ok. When I measured it it's getting 6V a.c. between live and earth, and nothing between live and...
I went to a small job today to change a sensor for an outside light. I expected it to be straight forward.
I started by isolating the supply, which ended up taking longer than expected as it needed 2 circuit breakers to be off in order to isolate it.
I explained that i would need to remedy...
We're looking to have some uplights installed across the side of our property, I've purchased a few of these:
Garden Trading LABV01 Bovingdon Single Adjustable Outdoor Wall Light - https://www.dusklights.co.uk//garden-trading-bovingdon-single-adjustable-ip44-outdoor-wall-light-p7135/s7145...
Evening,
Having some garden work done and need an electrician to finish it off. Already have power in the garage which comes direct off the main fuse box and on a concatenating wire, so hopefully this work can come off that supply with no need to bury anything.
Looking to add two bulkhead...
Ive been asked to look at job later this week, which involves upgrading 70w sodium flood lights to LED. Can any one recommend any they have used?
Also the customer mentioned they are on built in photo cells at the minute so just on all night from dusk, they would like them to be maybe timer...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.