What's this all about, keep coming across deep boxes packed to fault inducing capacity with cables, looks a complete cluster f*** to me, or am I just getting old?
Opinions appreciated on this one.
Garden in approximately a square, 20 metres pr side
The board is under the stairs and I'll run a 6aRCD protected feed behind the units to the rear wall and into the garden; everything outside in Schneider boxes filled with Ray Tech Gel
Cable will be either Hi...
Following great advice on here about wiring my ceiling light I've now moved onto replacing the plastic light switches. Does anyone know if a 16mm back box will be OK to accommodate this switch...
Hi Everyone!!
As you can probably tell by the question I am definitely no electrician :)
I wanted to change my light switch as I broke the old one...I purchased a new light switch but it was flat whereas the old one was more of a box. I tried to attach the wires following a youtube video but...
Trying to install Drayton wiser hub r...
The backplate has previously been wired and is as in picture. Attached.
The diagram is in instructions as how it needs to be. Attached.
Which wired need to go where..
Please help
Just on the chance that anyone fancies selling their private number plate in the future , I might be interested if it electrical or electrician related.
I realise they are not to everyone's taste and I'm compensating / having a crisis / shallow / infantile / got better things to do with limited...
Hi everyone found this today cooker outlet converted to a double socket which the cooker is plugged into it then a extension lead plugged into other socket which runs the gas hob ignition and garden sockets and garden light's all on 33amp mcb with 6mm from board to cooker then 1.5mm to outside...
looking to put 4 sockets in a drywall box in the kitchen, it's not wide enough for four in a row. Is there a square type like the attached one but without the module slots?
Hi,
Long term guest viewer but could do with some advice if that's ok.
As above, 55 plate fiesta 1.4 Style that wont crank.
Immobiliser flashing red led doesnt phase out after ignition turned on. Flash Code 16 (CAN link error between PCM and Instrument Cluster).
Battery is 13v.
Fuses...
I have to install roughly 150 points at a large property. The client is style conscious and wants to install Brushed Steel / Chrome / Nickel Flat plate sockets and switches.
Is BG Nexus a good and sturdy brand? Not shoddy quality like LAP which keep falling off / failing. Mainly worked with MK...
I had reason to unscrew a metal 4-gang switch-plate to investigate a noise. I discovered that the earth terminal on the switch does not have a wire to the metal back box, or anywhere else. The lighting cable earths are terminated in the earthing point in the back box.
The wiring to this...
hello i want to remove some down lights from a room
before i remove the fittings and reskim ceiling etc
i was hoping to take out the bulbs and find some blanking plates to fill the holes
do these exist as i cant find them ?
i suppose the market for this product is pretty small !
cheers
No longer needed after next week, so looking to sell. Opening up on here before it gets listed on Auto Trader next Friday. If anyone is interested drop me a PM, but I feel the price is usually enough to whittle out those that are interested or not.
Will be looking for £3500 on Auto Trader...
I hate the stuff and haven't fitted it for years.......but have a customer that wont be persuaded and wants brushed steel screw less flat plate accessories. The job is huge (in the region of 600 points altogether) so want to find something that's not going to be a PITA. Any recommendations...
Morning all, and happy Friday!
I've been asked my advice on what UPS would be suitable to run an ICT machine (ICT=In Circuit Test, it's machine that tests electronic PCB assemblies).
Now it is fed from a standard 3 phase supply, but I am confused a little by the rating plate - I've attached a...
View Our Selection of 17 Plate options here
If you have any questions on the offers available, please drop me an email at [email protected] or complete a Contact Us form on the Vans Direct
I discovered this whilst removing tiles in my daughters kitchen.
It disintegrated when i touched it with the sds drill
No enclosure just a backing plate rawl plugged to the wall and plastic terminal blocks behind.
As its unsafe and exposed I need to repair it as quickly as possible.
There isn't...
Hi all.
I have been asked to put two lights on two 30ft floodlight pylons. (one on each)
They need to be at around 6-8ft high. It will be a new circuit and run in SWA.
Is it 'correct' or acceptable to run the cable up the pylon to that height? (on the outside)
Also, any ideas on cable fixings...
Just had a new kitchen installed. The new cooker and hob didn't come with any cable. The hob is rated at 6Kw and the single oven at 2.2Kw. The circuit is a 32A mcb, 6mm t&e to a ccu and then 6mm down to the connection unit.
MI says to use H05V2V2-F T min 90C. Is this Butyl? I was going to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.