potential

  1. B

    Potential house purchase - current electrics setup and future plans

    Hi, I'm interested in a house built around the 1980's in Northern Ireland. I took a few photos of the consumer unit etc. which is situated in the garage. The house has a a double electric oven, 2 electric showers, an immersion water heater as well as all our usual electrical sockets spread...
  2. D

    Time Bell Cable Potential Usage Doorbell/Security Camera (USB)

    Hi, I purchased a Time twin strand bell cable with a rating of 12-30V, 2A, low voltage, not for mains use. I wish to use this for installing our new Ring wired doorbell. We don't have an existing doorbell wired setup so it would need to conform to a DIN rail transformer specification of 24Vdc...
  3. S

    Why did test lamps show 0V between live side and dead side?

    I removed a fuse and before reinserting did the following tests using test lamps. Live side - Neutral = 230V, Dead side - Neutral = 0V, Live side - Dead side = 0V. I then used a multimeter to check these results as I was expecting a potential difference of 230V between Supply side and dead side...
  4. A

    Strange AC Potential

    I am trying to understand the underlying mechanics of why I am getting a voltage potential from a metal cabinet to my body. The electrical cabinet has an LED light fixture in it. I live in a very old house so there is no ground wiring. I was noticing a very slight shock when I brushed up...
  5. M-B-Electrical-Services

    Potential client sends pics that concern me

    Hi all. Just a quick question, for you guys. I have received a phone call today with a request to carry out a commercial EICR on a chip shop which has a flat above. I said I would send a quotation when back in the office to which she said "I'll send some pics". After receiving the pics, I...
  6. sythai

    High Ze causing headache !

    Hi Guys Any advice/ pointers would be appreciated 😉 Have ‘pretty big’ new build house we’re wiring from scratch. New supply in from DNO is PME, but we have Ze of 0.51 😕 Are DNO obliged to keep this under 0.35? Wouldn’t be that much of an issue normally if regular size house and meter was...
  7. nicebutdim

    Approaching potential employers.

    Not looking for a job - well I am and would welcome any offers, but that's not the purpose of this thread. What I need at the moment is advice about what sort of approach is most likely to be well received by potential employers. I might have the opportunity to start a full apprenticeship this...
  8. N

    I need an indepth explanation of potential equalization

    I need an indepth explanation of potential equalization
  9. P

    Need help asap!!! Potential danger and idk

    Okay today my renter said she trying to unplug something from this outlet and somehow pulled the faceplate off. So I go up to investigate and this is what I find (attached pictures). Any suggestions? I'm confused how this outlet could have arched to anything. Also it looks as though it had...
  10. C

    92 volt touch potential

    I'm really confused by this engineering article. How can the maximum touch voltage be 92 volts on a 230 volt system when in theory it ought to be 115 volts or higher? https://www.gt-engineering.it/en/en-iec-standards/iec-60364-4-41/tn-systems Huh?
  11. HVManiac

    Is there a potential earth leakage or is it something else?

    I'm facing an electrical issue in my house since last Christmas. When the lights or appliance with motor in any room are turned off/on the TV would go out and come back on in a short span (as if the power went out and came back in a second). I recently had some mishaps where my two older PCs PSU...
  12. justcurioustwo

    Is the potential elec output worth the effort?

    I've run the numbers and I came up with a value. I need to know if its even close?
  13. T

    UK Advice needed please: Electrical set-up in 1950s/60s Maisonette - Potential Purchase

    Hi, I'd be very grateful for any advice/views available please on the electrical set-up in a ground-floor maisonette that we are in the early stages of purchasing, our offer having been accepted. We went to the property today to inspect a few things, and noticed a lot of electrical wires/boxes...
  14. T

    Combing two incoming municipal electricity supplies

    I've an interesting problem. I've got an potential client. It is a commercial property that used to be two separate businesses each with a separate 60 Amp single phase electricity municipal electricity supplies to the same building. The one company has gone bust while the other one has grown...
  15. N

    Potential hazard or not?

    We've had a safety memo sent out to us all today regarding a new type of compressor we are using. In a nutshell, its single phase, ran off a plug top to a rotary isolator on the unit. The L/N/E all go through the isolator, so.. when you switch off the isolator, you're switching the L,N AND E...
  16. H

    Potential job

    Got a lead on a job; they’re wanting metal trays (containment) with steel conduit to create the ‘industrial look’. I’m cool with their needs; explained about fire alarms/emergency lighting and they talked about doing it ‘piece meal’. With the area being used for a venue, it all needs sorting...
  17. Z

    I never install ring circuits, the potential for danger is unacceptable

    I’d like to know if anyone else here refuses to install ring circuits in domestic premises. For me it’s either a 20a radial / tree circuit with 2.5mm, or a 32 radial / tree circuit with 4.0mm. Frankly I’m tired of finding broken ring circuits on 32a CB’s, as well as mismatches on end to end...
  18. Cupa

    Potential Overloaded? (Kitchen Oven & Hob)

    Popped round my old dear's yesterday. She quite fancies replacing her ceramic hob with an induction one, so I thought I'd take the oven and existing hob out to see what state the wiring is in (property built 1930s although I expect probably had a refurb at some point in the 70s or 80s, but...
  19. S

    Total amps potential

    hi all, Quick question I hope you can help me with, it’s to do with VIR triangle, and in this case how many amps pass through the circuit.. so.. If a human touches a circuit with 100,000 ohms resistance of the skin, and the voltage is 240 volts, does this mean the individual gets hit with...
  20. O

    Down light Installation. Potential DIY if possible?

    Hello, I am looking for some help if possible please, I am buying a new build property in the near future and the building company want payment per down light. Instead of paying this I am looking to install the lights myself. There will be around 6-8 in the kitchen, 2 in the downstairs...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock