printer

Recent contents Top users
  1. R

    Brother label printer 18th edition

    Any one know how to get 18th edition templates for the Brother label printer?
  2. K

    Help labelling Consumer Unit with Brother Ptouch E110 label printer

    I am fed up with shoddy labelling using stickers with the CU so bought a Brother P touch E110 label printer It has a Faceplate option which appeared to be ideal. I set it for faceplate width up to 300 mm and the enter the text but cannot see how to get spaced out sections. the model up has...
  3. bigspark17

    Help needed with commercial kitchen food order printer

    problem is this printer has the plug on the end As seen in pic. Has anyone been able to extend this cable using cat5e or use an adaptor of some kind. I have aspare cat5e nearby i can use, otherwise running a wire will be a nightmare in a newly refurbished property. Ps the other end of the lead...
  4. Gavin John Hyde

    Brother E550W ELECTRICIANS PRINTER

    Bought one the nice fancy Brother label printers... Only £114 from toolstation. Anybody got any tips for getting the most out of it. tricks for speeding up fuse board and consumer unit labels would be welcome. Completely different to my previous one. having a play at the moment but quite...
  5. J

    Brother P-Touch label printer cartridges.

    Good morning ladies and gents. For those who use a Brother labeller, do you use genuine cartridges or compatibles? And where do you get them? Cheers.
  6. P

    Megger Pat 4D/3 Barcode printer

    Hi everyone I have a megger pat tester and want to print barcodes but the printer for the above is both rare and expensive. I have tried a couple of thermal printers one is a serial by epson TM-T88111 and does print but just prints a block of question Mark's ? The would seem to be caused...
  7. J

    Printer in-rush current

    I recently tested 10 laser printers, all the same model of a well-known brand. I always do a load test and two of the 10 exceeded the wattage shown on the specification plate as they started up. I didn't fail them as I could see no sign of any problem such as overheating and they were both in...
  8. Doyley

    Turning things on stops 3D printer

    Hi all, So in my mancave I have a lot of things running from extension leads. I'm looking for a better solution to this and made a different post. In the meantime I have a frustrating issue. I have a 3D printer and often prints can take many hours. Sometimes if something is printing and I...
  9. D

    Heads up. Brother label printer. Half price.

    At screwfix. Good price if anyone is in need of one. Only until midnight. Brother PTE-300VP Hand-Held Label Printing Machine - https://www.NoLinkingToThis/p/brother-pte-300vp-hand-held-label-printing-machine/3279g
  10. the pict

    Label printer ideas please

    Time to get a label printer is there a favourite among the trade P
  11. N

    Printer not switching on unless fuse is flipped

    Good evening all. Despite of being utterly ignorant on the subject, I have an issue which tickled my curiosity and would like some assistance to understand. I have a printer (although I'm pretty sure it doesn't matter what appliance it is) that, sometimes, doesn't switch on. After numerous...
  12. DaveHsussex

    Wanted - Printer or IRDA Adaptor for Robin 1630

    Anyone have a Thermal Printer or IRDA Adapter for a Robin 1630 in their loft? £Sensible 07456617999 David
  13. GMES

    Bank Holiday

    So who's working on Monday, I have managed to get a rare day off but knowing me I will end up going to the office as I need to print and go through a load of designs for an upcoming job, This will be after a trip to buy an A3 printer. It is probably sad but it is the best chance of getting...
  14. M

    Brother PT-E550 label printer opinions

    Hi, I am looking to purchase a new label printer, I notice that CEF had the Brother PT-E550 kit on sale, does anyone own one and can give an opinion? I only do domestic wiring so it would be used for labelling CU's, cables and fused spurs etc. Any opinions welcome.
  15. A

    Labeller recommendation?

    I'm looking to purchase a labeller for labeling Consumer units, patch panels etc.. anyone reccomend a particular model? thanks
  16. Tiny Spark

    Speeding up testing of a large site....

    Hey all, Ime looking for some ideas from people who have done large PAT jobs for some speed up advice. For those who dont know i recently changed jobs. Ime now part of a team of 6 and one of our responsibilities is the PAT. Now its a large site and we are talking many thousands of items here...
  17. A

    Seaward Europa Plus Printer

    Hi Does anyone know of any decent printers that are compatible with the Seaward Europa Plus. At present I use the K3300 that was supplied with the tester, which is fine for small jobs however I don't like the labels it produces and was looking for a printer that would produce a label that is...
  18. S

    Any recommendation for a label printer?

    I need to change the rubbish printer I have and don't want to end up with yet another rubbish one. Can anyone recommend a printer?
  19. S

    Any recommendation for a label printer?

    I need to get a new label printer that is durable and does not need a mortgage to buy. Can anyone recommed one or at least give me information of what they have and if they are happy with it. Cheers Stephen
  20. S

    Meggar PAT420 + Printer & Scanner Brand New Never Used

    Brand new PAT420 with purchase invoice 1year old with Brother printer and hand scanner. Brought new for a job that did not come about so now up for sale as unrequired, protective plastic still on screen and all items untouched. No suite software came with this tester package. I have pictures so...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock