advice needed. late 2004 CRv.
1st setting (lights off) comes on automatic here in norway when i turn the ignition on. all lights work in that setting.
2nd setting nothing works and that fuse blows everytime i turn to that setting.
3rd setting front dipped or high work but no back lights work...
Hello all,
Our Fridgemaster MTRZ110 freezer is, I think, playing silly bu??gers. Certain foods freeze as expected, ie rock solid, others not so. In all my years I've never known a freezer to fail, (there's always time though) But, as above, it's working fine except on the odd item, ie pre-packed...
Hi there
I wonder if you can help me please?
I have a problem with the drivers side rear lights on my (2007) Audi A6. (includes taillight, reverse light, brake light and indicator.)
All other lights are working perfectly.
I am baffled because – when I’m stationary – before setting off – all of...
Hello, I’m not an electrician and I have a question in relation to Dimplex Duo300n.
Some background information: a couple of months ago I have moved into the property where those heaters are in place (there is 5 of them).
The people who used to live in this apartment before, used RXPW4 control...
Hi
I've had an electrician fit a new set of led recessed ceilings lights in my bathroom including one which is in my shower cubical.
When he has taking the old lights out some of the ceiling came way and he has told me I need to fill the gaps around the light fitting in the shower. I just...
I bought a led light about a week ago. Everything works but there is a problem. The light is sequentially illuminated. I mean (Off - Warm - Cold - Natural - Off ). But I just want to use warm light. I have to wave my hand at the sensor three times to turn off the light. My question is how can I...
Have three (3) outlets in the kitchen that suddenly stopped working. One of the outlets is a GFCI outlet, and pressing the reset does not do anything. Also tried flipping the Breaker with no success. What most likely is the problem? Should I replace the breaker or replace the GFCI wall adapter...
I’d be keen to hear your thoughts on 1 of my customers problem.
Split board, TT system. Located in a village, neighbours report no problems.
Customer getting random tripping of sometimes 1, sometimes both RCCD’s. Totally random, no particular reason. I’ve tested the installation, nothing...
hello all,
I have a Honeywell Galaxy G2-20 burglar installed in my home (about 9 years old).
Recently I got a Battery Miss fault showing on the keypad. So I replaced the battery in the main panel with a new one.
It was ok for a few days, then the fault re-occured. So I checked the main...
So I don't normally get involved in entry control however customers BPT VA/200 is no longer ringing on the handset side. No obvious loose connections in the intercom or handset however the controller looks like something has gone pop.
Any quick fault finding tips for the BPT VA/200 or shall I...
Hi there...I'm pleased to find, hopefully, somewhere to answer a situation I find myself in. I'll try and compress the long saga...
In July 2020 I had a full rewire done on my house. Qualified electrician, tick. Registered with NECIEC (I now find out he wasn't). Competent, now I find out not...
Hello,
I have a CEE to UK plug adaptor, when I plug something in I need to press the plug with force. I noticed inside the earth pin hole, it was very scratched and some plastic coming off from shutter part. If I use a Plug with a Plastic Pin plug, It is easier to plug it in.
Is there a way I...
Hi don’t know if anyone can help.
Starter motor for a countax ride on lawnmower K14 1992 briggs and Stratton vanguard 14hp engine
2 months ago it would not start, replaced the solenoid, a new battery then the starter. Replaced starter and it worked. Three times now it will not start – sit on...
I have 2 new Hunter ceiling fan light combinations. We previously had Hampton Bay fan/light combos. We have dual switch 3-way wiring, and we could turn on the fan or lights separately from the top or bottom of the stairs. Now to turn the light on the fan’s switch needs to be on. The light switch...
Ran a security light off a fluresent light in kitchen.
Used 4 port supply push in wire connecter.
Earth and neutral wires connected inline to existing terminal blocks.
When I turn "OFF" bathroom fluresent light after use, the security light turns on.
What's causing this please?
Thanks!!
Hi.
I've just started renovating my workshop.
It's about 30 years old, the walls on the inside have been doubled up with 15mm plasterboard. My plan is to cover the walls with 6mm hardwood ply because I got the sheets for free.
I've just started screwing them to the walls. The original...
2012 Volvo S60 D3 150 000 km
Battery voltage normal 12,6V over battery with motor stopped.
Good motor start always.
At idle, no charging voltage (12,1V) over battery.
Charging failure light comes on.
Rev up to 1500 rpm gives 13,4V over battery.
Return to idle speed again maintains 13,4V...
I bought a 240 schluter heated cable, did all the required test. everything passed. Tried 2 new thermostats. The heated cable has a hard time getting past 26-28 degrees Celsius. And its constantly fluctuating in temperature even though its set to 29 permanently.
The electrician i used has it...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.