hi all I’m just wondering are the forum members moving away from doing ring circuits and doing radials instead ? I have been reading that this may...
Just started on a complete refurbishment / extension on a 3 bedroom property which is having a complete rewire. I'm not keen on Dual RCD boards,...
a customer has asked for their BC rose and pendants to be changed to ES. I can't find any rose and pendants with es lamp holders anywhere! has...
Situation. Garage being converted into office. No spare ways in CU. RCD protected circuits, 2 x Radial 32A in 4mm T+E, 2 x Ring 32A in 2.5mm....
I am part way through a condition report for a customer. The house is generally in good condition but the electrical installation is quite old....
Ho guys anyone know much about these? Got a burger van thats been out of use for some time. Been bought by a new owner and needs sorting out....
Afternoon chaps and chapettes, got a tricky one for discussions, firstly let me explain I am an Electrician (retired some six years now) my...
can anybody help i did a rcd test on a circiut on a split load board and it triped out both sides of the board . I then tested a circuit on the...
Had a fault with our hob: Only two rings work, others work when hob first switched on then go off shortly after. So called warranty company. When...
Hi there - just been out to install a cooker. After confiming that the circuit is OK next was testing the cooker. It is a 2nd hand cooker that...
hi there, while completing an insulation test on a ring circuit i have come accross a few problems. insulation between l-e and n-e are fine,...
Hi all Looked at a job today and the customer is adding quite a bit onto a bungalow with 2 new extensions.My ? is, will a 100amp main switch be...
How lucky am I, the builder has installed the lighting ring!:):)
Trying to locate a ring circuit in a house and so far i have found 3 rings within rings..!! ARGH!!!!! CHIMPS!!!! :eek: any body else had similar...
i have just looked at a strange house with loads of extensions done. the board isn't labbled up. on turing off the mcbs on two ring circuits its...
This is my first post on this forum, so HALLO to everyone! Im nic domestic installer, but because of lack of work at this moment im doing a midle...
Hi there, Quick question for you all. At work we have just knocked 2 rooms into one large room to make a bigger staff rest room. The sockets in...
Separate names with a comma.