rotary isolator

Recent contents Top users
  1. W

    Do I need rotary isolator switch?

    Hi all, I'm installing a temporary supply to a modular kitchen and need to bring over a new 3PN supply for a new temp consumer unit located externally in a suitable IP enclosure. The cabin is connected via 63a plug, do I need a rotary isolator to control my 63a socket if the said socket is...
  2. B

    Implications of replacing a 40A with a 125A rotary isolator.

    An isolator had heat damage and was replaced, not by me, but the new isolator is 125A instead of 40A. They found one and threw it on. I locked it off last night and today it is back on line, deemed okay to run until a replacement arrives. This is on a 20yo piece of packaging equipment. Anyone...
  3. T

    Single pole rotary isolator

    Hi everyone, I have moved into a property with a 63a single pole rotary isolator controling a inline water heater. Is this safe? Surely it should be a 63a two pole isolator switching both the live and neutral? Any advice would be much appreciated. Thanks.
  4. E

    Rotary Isolator with enough space

    Hi i have a hot tub job coming up and will need a rotary isolator. I need to bring two 6mm swa's (single phase) into its base and will use pirahhna earth nuts. I know these isolators dont have much room inside em, the larger 63a units (at least the ones I can find) have 25mm knockouts so no...
  5. J

    32 amp rotary isolator

    Anyone know if there is a reg in regards to supply going in to the top of a rotary isolator. We are changing the isolators over for ac units, long story short they won't reach the top terminals now, so feed can only go in bottom. Just a 2.5mm 3 core swa. Cheers
  6. S

    Double pole swith or rotary isolator

    Hi guys second fixing a kitchen and noticed there is a rotary isolator for some kitchen appliances why is this instead of a double pole switch ??
  7. B

    16A rotary isolator help

    Currently have feed to 16A rotary isolator, I’m gonna come of this with 2.5mm to a socket then to a fused connection unit to feed 2 lights if lid this ok
  8. A

    Rotary Isolator that takes 2x16mm?

    Does anyone know of a rotary islotaor, weatherproof, that'll take 2 x 16mm incomers? I've got long runs out to parking bollards so they've had to size up the cable for volt drop. I could do it with a street light cutout but it wouldn't allow them easily isolate it. Many thanks for any help.
  9. R

    Plastic 3 phase Rotary Isolator Earthing

    Hi All What method do you use for earthing armoured to armoured on a platic 3 phase rotary isolator? Assuming I will have one armoured on top of the isolator and one on the bottom. At the moment I use the banjos and on the inside of the isolator using an m6 bolt I'll lug the earth cable and...
  10. G

    tp rotary isolator

    Sorry if this sounds silly but here goes...... What is the rating of each contact on a 32amp triple pole rotary isolator? Obvious answer would be 32amp but I just want to clarify incase each terminal is rated at 32÷3 amps to provide a total of 32 amp over the three terminals. I'm basically...
  11. Jackflash

    rotary isolator

    When an air con installer asked for a 25A isolator are they expecting a 20A or 32A supply to it?
  12. P

    Rotary isolator as main switch

    Hi, im looking to install a main switch in a commerical premises, so for example board changes, ect can be done without taking out the supply fuse. Would a rotary isolator be suitable?
  13. T

    AC rotary isolator

    can anyone tell me if there is a regulation for the colour of isolator handles? I have just taken delivery of some 20A AC surface mounted rotary isolators with grey and black handles, I always thought they should be Red & Yellow handles??????
    • TJLinks
    • Thread
    • aus isolator rotary rotary isolator
    • Replies: 2
    • Forum: Australia
  14. Amp David

    Rotary Isolator choice

    When its come to 4 pole rotary isolators, do most of you use one brand or whatever is in stock at the time of ordering. Fitted 2 Gewiss ones today and thought they'd be good to work with, how wrong was I? No space in em at all, the cheaper ones from Chint and Europa seem just as good but loads...
  15. Amp David

    Rotary Isolator choice

    Are the more expensive ones worth the extra dosh. Local wholesaler has some MCG ones but are much cheaper than the usual MK ones i have used.
  16. Y

    Rotary Isolator????

    Can you come off a 45amp rotary isolator to a fused spur to supply a feed for an out side light??? the Rotary isolator is supplying a hottub and is run in 6mm SWA witha 32amp rcbo??? Not sure if i can come off it or need to run a new feed!!! Any advice would be great help!!! Thanks!!
    • yoz7241
    • Thread
    • aus isolator rotary rotary isolator
    • Replies: 4
    • Forum: Australia

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock