scantronic

Recent contents Top users
  1. D

    Scantronic ion 16. Super fail v9

    Hi all can anyone help please can’t set alarm says on Pannel Super fail have changed main battery in control panel also in pir. Still the same any help please guys
  2. R

    Scantronic 3400 panel

    Hi Looking for manual for my old scantronic 3400 panel year about 1992, needs reprogramming after power and battery failure
  3. M

    Scantronic tags restricted number range

    Hi Folks, After some experimenting I have concluded that the Scantronic control panel has a limited range of tag numbers that it will accept. I have dozens of tags, all of which respond normally to an RFID reader, and some of which were specified as compatible with Scantronic panels. But only...
  4. S

    Scantronic panel problem

    Hi, my panel is a scantronic 9448+ ,when the system alarms only the internal panel buzzer sounds. If I do a bell test ( 4 enter then code ) the outside sounder , sounds and the strobe flashes. Thanks.
  5. C

    Scantronic 9651 v2 speech dialler

    hi I am trying to find some info on scantronic 9651 trying to install a v2 speech dialler . I have no problem installing these great we systems not much on the the dialler I got the whole kit together the guy said it was all compatible
  6. D

    Re-setting a Scantronic alarm - help needed!

    Hi I have bought a home with a 500r Scantronic alarm which needed a new battery in the main box. My partner stupidly didnt read the manual, opened the box in our loft and set the internal alarm off once he 'replaced' the battery. Our code didn't work, and it sounded off until he disconnected the...
  7. O

    Scantronic ion-16 alarm system shut down, can't get running again.

    Initially disconnected 4wires on keypad with power switched off at fused spur reconnected wires back in order system failed to reboot blank keypad all fuses checked hav had an electrician look at it but 2 no avail possibly keypad not sure.any help or advice much appreciated thx
  8. T

    scantronic 9800

    hi guys have a scantronic 9800 showing bF internal battery is 13.5 v so well within range will the battery in the external sounder bring up that fault code cheers for any responses
  9. S

    Scantronic ion 16 door contact

    hey guys I've installed a scantronic ion16 alarm system a year ago been working fine. Now i want to add a door contact but for the life of me can't get it to work. I know it needs 2 zones but abit unsure on the jumper settings, 2 jumpers one for n/c n/o now I've set it to n/c and a reed jumper...
  10. K

    Scantronic 9751 / Galaxy G2 Advice Please!

    Hi all Being sent out on my own today for the first time to service some alarm panels - been practising all last week supervised. Just want somebody to give me a step by step confirmation on how to test the communication module (send individual signals, i.e. fire, PA, intruder, confirmed etc)...
    • ketanc
    • Thread
    • advice galaxy g2 please scantronic
    • Replies: 0
    • Forum: UK Electrical Forum
  11. C

    Home Alarm System

    I have searched online for a GSM home alarm system and Visonic, Yale, Infinite Prime and CommPact seems to be the most popular ones, what are your thoughts and which one you suggest me to purchase? I have rang two installers today and one said he installs Scantronic alarms and the other one...
  12. J

    Exit and Entry Doors on Scantronic 9600 Alarm

    Hi ... Apologies if this is the wrong place to post but everything I come across says closed thread . We have a Scantronic House Alarm and we have a front and rear door both with the contacts on them for exit and entry.I have looked at the paperwork and they are listed as exit and entry but we...
  13. S

    Scantronic wireless door contacts

    Got 2 of these for sale. Got them in a kit that won't be needed. £40
  14. B

    Scantronic 9651 Boxed

    with 9930 rkp if your interested let me know
  15. C

    wiring PIR to scantronic 9651PD

    Trying to fit a standard PIR using FSL conjnections method and cannot get the the resistance to change to 6K9 when PIR is activated! Can anyone help?
    • colfair
    • Thread
    • alarm check circuit pir resistor scantronic terminal wiring
    • Replies: 6
    • Forum: UK Electrical Forum
  16. K

    Scantronic alarm, bell box fault

    I know this isn't the correct place for this and it should be in the alarm forum, but I was just hoping more people may see it fitted a scantronic I-on 16 panel today, got it up and running but getting a bell box tamper fault on the display screen, think I have it wired correctly and the red...
  17. K

    Scantronic I-on16 dual tec wireless sensor

    I know I'm not in the right place but as I'm not allowed in the privileged alarms and cctv room yet does anyone know if scantronic make a dual tec wireless sensor compatible with the I-on 16 panel cheers Kevin
  18. Amp David

    Scantronic alarm choice

    Looking to fit this alarm panel to replace an old one. Any comments from anyone who's used them before regards ease of use, reliability etc. Scantronic 9651 EN 41 - Intruder - Alarm Panels - Scantronic 9651EN41 - Alarm World | Burglar Alarms & Home Security | CCTV and Access Controls and...
  19. M

    Linking Smokes to the Scantronic I-On16 alarm system?

    Hi all, Just looking at smokes and wondering if it's possible to link them in to the Scantronic I-On 16 alarm system? I was looking at the AICO EI180 series of smokes. Ta, Si
  20. S

    Wireless alarms?

    Any good recommendations for wireless alarms? Buying a house with no alarm in and don't want the mess of running in cables at the minute any ideas?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock