smokes

Recent contents Top users
  1. NellyManjaro

    Hard wired smokes with CU change?

    Hopefully an easy one without much debate but I've just had spoke to someone who has had an electrician go to his rental property and say it needs a new CU which I'd agree, all sockets to be replaced as they don't have switches which I would personally but didn't think this was actually a...
  2. K

    Connecting new Smokes to existing on Extension.

    Hi all, just fitted out 2 storey extension to house and BC asked if new smokes were interlinked with existing smoke on Landing. Existing is Battery only, do I have to change existing? If so, does that go onto fitting new to Kitchen/hall aswell? Can't find anything in Building regs. Thanks, Kev.
  3. A

    Eicr code

    Hi just wondering what code you would give for hard wired smoke alarms with removable batteries, I always thought this would be code 3 but I got told recently that it’s a c2. Would be grateful if someone could clear this up for me also would the code be the same for out of date smokes? Thanks in...
  4. sythai

    Nest Smokes (heat?)

    Hi Guys Just seeing if anyone knows for definite if Nest have a heat capability or not yet? Have a new build coming up which obviously needs smokes & heat ? And they have specified Nest throughout. I'm thinking not possible yet and doubt very much they'd be a way of linking into an Aico heat...
  5. Thomas Connolly

    Fire Angel Heat and Smokes

    Hi Guys, Looking at wireless heat and smoke detectors that can be interlinked. Fire Angel do a range of these. Just want to know, are these ok seeing as they're wireless? Do heat/smokes have to be hard wired? Or will these wireless ones that can be linked be ok? Thanks T
  6. S

    For Sale Aico 3000 Series Heats & Smokes

    I’ve got a job lot for sale - 3000 series 6 x Ei3014 Heats 4 x Ei3016 Smokes Anyone’s interested in taking the lot?
  7. P

    Smokes wired to a JB?

    Have a bit of an awkward run at a job and was debating whether it was easier to wire all the interlinked smokes to a Wago box or JB. They are Aiko smoke alarms and wanted to know whether anyone has done this before and would it make any difference?
  8. R

    Which smokes to fit - mains or battery powered?

    I don't normally get involved in this but have been asked by customer to fit smoke alarms - this is for a property that will be rented out. I know that mains powered smokes used to be the way to go in this situation as tenants tended to take out the PP3 batteries to use in other equipment...
  9. R

    Interlinked radio smokes supplied from lighting

    In a position where only possibility is to install smokes supplied from local Pendant. The smokes are radio linked, however I want to double check Regards isolation point. I don't plan on installing one due to possibility of somebody turning off. However wouldn't a permanently wired appliance...
  10. H

    Apollo Smokes - Wiring

    Afternoon all, I've attached an old smoke from the 70s (I believe), struggling to find a wiring diagram. Basically, the current wiring is all red in colour so it's hard to discern what's what. Need to replace with something a bit more modern (Series 65 Apollo) but can't find a wiring diagram for...
    • hightower
    • Thread
    • cables series smokes wiring
    • Replies: 10
    • Forum: UK Electrical Forum
  11. J

    Mains smoke alarms

    Evening, I've just been asked to install some mains powered smoke alarms to a customers property, can I still add these to an existing lighting circuit (if the alarms have a battery back up) or do I need a dedicated RCD Controlled circuit from the CU?
  12. the pict

    Smokes and BS7671

    As BS7671 makes no mention of domestic smoke and heat detectors where on the EIC should they go, aside from the old own circuit/ shared with light circuit debate, a discussion with the BCO has prompted this, Pict
  13. kingeri

    Lighting on end of smokes

    Been asked by a neighbour to change all white accessories for chrome ones and put up new fancy light fittings in their 3-storey house. Whilst doing some quick testing on the (newish) lighting circuits I found the circuit supplying the top floor lights is a bit odd, there are 5 wired interlinked...
  14. cprfenom

    Communal Smokes

    Morning all. I have been asked if it is possible to change a damaged smoke that is part of a communal fire system. I can get the unit, but do not want to change it if will effect the system. Any idea if it will? Regards
  15. tazz

    Apollo XP95 Optical Smokes

    New Apollo XP95 addressable Optical smoke detectors x 10 complete with new detector base, xp card £15 each
  16. J

    aico mains wired interlinked/radio linked smokes and heat detectors

    A little query for you guys that fit these smoke detectors, I've got a site visit next week to quote up for a landlord requesting more smoke and heat detectors fitted in his apartments. He has explained on the phone that he currently has aico mains wired smoke detectors fitted in some of his...
    • juanpabs
    • Thread
    • aico detectors fitted heat linked mains radio smoke smokes wired
    • Replies: 27
    • Forum: UK Electrical Forum
  17. M

    are smoke alarms legal requirement

    Hi everyone I've been asked to rewire a big period house and the owner has stipulated absolutely no smoke alarms! I have argued the case for them and was unsure if these are a legal requirement or could these be left out of the installation on his say so. Can anyone shed some light ?
  18. driverman

    smoke - heat - carbon alarms

    I will be installing several smoke - heat and carbon monoxide detectors shortly as per spec. I've not done carbon monoxide detectors before. I take it, electrically wiring them is the same as smoke and heat detectors. They will be wired and interconnected on one circuit and protected by a RCBO...
  19. P

    Connecting Smokes - Hager Guidance

    Hi Guys Hager's Consumer Unit Guide to the 17th Edition makes the statements on page 11 According to BS 5839, circuits supplying fire or smoke alarms in dwellings can be protected by an RCD provided that either: i. The RCD serves only that circuit. For example with the use of an RCBO ii...
  20. onions1066

    Smokes in lofts

    Anyone else having problems with heat detectors on lofts over the hot period? We've fitted quite a few lately after property's have had pv panels installed. They have been going wild over the hot spell. Just wondered if anyone has had the same?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock