Hi All
I'm a little unsure if i need to test all circuits in a consumer unit if i have added a new circuit into it. The circuit added is a ring final and has been installed in a spare way on the board, also one of the lighting circuits has now had a single pendent changed to 6x downlights. Do i...
I need to find a replacement screw for the cover for an Excel plastic consumer unit.
This is a nasty plastic 90-degree turn type, about 2 inches long.
Possibly similar to ones also used on BG plastic consumer units?
Anyone know of a source of these (apart from buying the cheapest CU that...
Hello all. This is my first post so please excuse any novice errors! I have just been to a customer who is putting in a new cooker and had no existing cooker circuit. They have run 10mm cable from the kitchen back to the board and wanted it connecting up. I took a B40 mcb with me but there is no...
Hi chaps. I've come over from the Tilers Forum for some precious advice. In an hours time I hope to install Electric UNDERFLOOR heating in my own bathroom, and I need some quick advice. Its about the temp sensor. I suddenly saw that it "should" be installed in a conduit to allow its removal if...
Does 6mm2 SWA fit into 25mm Blue MDPE Pipe. The idea being to protect the cable from damp soil or water ingress when it is buried, not for mechanical protection. No tight radii to worry about just a 10-15m straight run.
Hi men,
Probably a bit of a stretch considering anyone who has one probably uses it. Does anyone have or know where I could get a spare strap for a Megger 1552/1500 range? I have bought a spare MFT 2nd hand but it doesn't come with the strap which is frustrating. Any ideas?
Cheers lads!
John
I have only one set of keys and wanted to know if a second set can be programmed (no i am not paying Mercedes £200 for it, thats almost a third what the car is worth) :evil2:
The key is the IR type like this one
We have a spare space on the consumer unit (new 2003) Two companies have done site visits and both companies said exactly the same thing when looking at it.....they would move everything one to the right into the empty space and thus make themselves a spare slot near the big red switch...
As per the title, i'm in desperate need of 160 hanger bolts for fixing into a steel structure.
I'm after a hanger bolt around 130mm in total length with an 80mm long fixing thread (for tapping into the sub-structure) and a 50mm+ long thread for attaching an adapter to.
Anybody have any...
Alright all, got a huge stockpile of old breakers and the like. Was wondering if anyone knew of any businesses that specialises in buying/selling of 3871s, 4293s etc.
Cheers
just getting ready to go self employed, going to start advertising in the new year never had much involvement with cert's the full eic i have no problem with, looking at the minor works cert obviously its only for additions to a existing circuit and alterations but not for a new circuit so say...
Due to glass damage i need to replace a customers panel - usual crap with supplier "we don't stock that anymore" you know the drill.
original panel: Caymax (aka CSUN) silver 250w mono.
VOC 37.3
ISC 8.78
Vmpp 30.1
Impp 8.31
1640 x 990 x 50
Maybe an ET 250 would do it - its very close in the...
Hey guys your help in this matter would be greatly appreciated!!!
I''ve been offered a months work in Cavendish Square but am in desperate need of digs for first couple of weeks - anyone know of anywhere/anyone willing to put me up for £100 a week? sofa will do!!!!
Sean78
Thread
anyone
central
electricians london
house
london
rooms
share
spare
Hi,
I need to obtain a replacement screw S2 for my part MC3 and MC4 crimping tool.
Can anyone suggest where I can get this from please?
Thank you
- - - Updated - - -
I meant screw S1
Hello,
I have got 3 core and earth cable (L, LS, N connected) running to the inline fan. The earth must not be used on the fan. So I've got a spare cable. I put earth sleeving on the end at the fan. I checked voltage on the other end 28V, so I suppose it must be induced voltage. The cable is...
i have been suspended from work regarding my PAT test machine been out of calibration,i work full time as a PAT Tester.
There is no re-call proceedure set up, i carry a spare meter so sent this to head office to be repaired to cover me when mine went in,this spare machine went missing from head...
stickywicket
Thread
calibration
electrical work
machine
spare
tester
trouble
I am fitting a new dual CU that comes with 10MCBs. For those that are unused is it acceptable to just leave them installed but switched off and identified as unused. Or should they be removed and replaced with blanks?
If anyone has an odd solar panel they want to donate for charity your feedback would be much appreciated.
Want to help 3rd world countries get electricity they much need.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.