thermal

Recent contents Top users
  1. Sparksaflyin

    Thermal cameras

    Hi guys. Any of you have thermal cameras? If so what are your thoughts? which ones do you have? Has anyone got the new FLIR one for smartphones? I’ve got a testing contract that’s ongoing so am looking for something to speed up the time spent on finding poor connections. Thought this would be...
  2. Marvo

    Thermal Cameras

    I see the prices have come down over the last few years and also there are options that link to your phone or ipad. Are these any good? What are your recommendations for a thermal camera for basic electrical maintenance work for someone who's on a limited budget??
  3. AJshep

    Flir C2 or C3 thermal camera ??????

    I have a large EICR to carry out for a company that carries out CNC engineering, its going to be a PITA as they are open 24-7 so there will be areas that I'm unable to inspect. So i was hoping to use a Thermal camera in theses areas. Looking at both these cameras it seems they are Low...
  4. C

    Thermal insulation covering cable

    I'm doing a garage conversion. 70mm insulation on block then an inch gap battened on top, then 35mm insulating board. Where's best for the cable to go in terms of derating etc... Cheers.
  5. polo1

    Motor protection

    Peeps, I have been asked to run a supply for a single phase, 3.2a extract fan (systemair AW500E4). Is it a requirement, recommended or just good practice to include thermal overload protection in such a situation? Thanks.
  6. C

    Thermal overload 3 phase to single phase pump

    Boiler panel controlling a 3 phase grundfos pump. Pump was tripping thermal overload... Pump replaced for a single phase grundfos by engineer etc... I was asked to convert the control circuit to single phase which I did. But still tripping on the thermal overload. Set it slightly higher for...
  7. F

    Thermal Store problems

    Hi guys (and gals) I hope you can help me. Will try to keep it fairly brief! :grin: Have a Torrent ECO with woodburner downstairs, so gravity. All working well for the past year, apart from rads getting hot then cool (as the water gets pushed round the system) so instead of standing with my...
  8. M

    Thermal imaging camera, any recommendations on the budget end?

    Not something I really need so don't want to spend a lot, but toying with the idea of getting a cheap one to see if it comes in useful, say locating underfloor heating elements or bad connections, and perhaps a look at the house from outside see where the insulation may be lacking (have my...
  9. S

    Thermal store heating system

    Looking for some advice on rectifying someone’s heating system. The system was working but when it stopped working the sparkie who came to fix it messed about with loads of the wiring now it’s not working great. I’m going to look at it to try & get it going correctly tomorrow so just want to be...
  10. Gavin John Hyde

    What do you think of these thermal indicators?

    In the local independant wholesaler and saw these for sale. Knew they existed but never given it much thought. Does anybody on here use them? If so what do you think
  11. N

    Economy 7 - Thermal cut out

    Good evening all, I have an elderly client I have been doing some work for and he has old economy 7 heating. The Storage heater in his living room keeps causing issues. Basically it stops working, I've opened it up and re-set the thermal cut out and it works perfectly for about 6 weeks then...
  12. mydigitalhome

    Anyone used Solarus combined PV & Solar Thermal panel

    Hello, I dont work for Solarus and not trying to advertise them. Home - Solarus - https://solarus.com/ However I have a Client who spotted their website and I cant find many reviews about this tech. Does it work or is it a bad compromise what do you guys think? Do any of you have experience of...
  13. L

    Thermal switch for belling farmhouse cooker

    Bit of an odd one, but one of you might have a an old Belling 900G Farmhouse range cooker and the main oven thermostat has failed. The part number is 46THC8/J5, however it's no longer available and I can't find one anywhere. Does anyone know if there's a solution, such as using a different...
  14. SpecialistEnergy

    New specialist in solar thermal on the forum

    Hello, I can see this forum is not very well attended - understandably in the UK given our woeful tariff scheme! Just thought I would post that I have joined these forums recently and I have 15 years worth of experience in solar thermal so if anyone has any Qs they haven't asked because of the...
  15. V

    Flir C2 Thermal Imaging Camera

    Hi guys. Got for sale a Flir C2 Thermal Imaging Camera for sale. It's brand new in the box and never been used. Had it for a little while and never used it so thought it best go to someone who will get the use of it. If you need anymore info on it please do not hesitate to contact me. Asking...
  16. R

    Thermal imaging what do you guys think of this picture

    Hi all, A company had some minor problems with a bussbar fitted, all got renewed and working completely fine but as a precaution they wanted a test on the bars (IR,Zs etc) whilst i was there i used our thermal imaging camera on the joints just to check no loose connections etc and i noticed...
  17. R

    Latching relay circuit for thermal store

    Hi everyone. Hoping someone can help. I'm using a recently qualified electrician to carry out the following work but he wants me to tell him what I want and supply parts for wiring to lpg boiler/thermal store. I would like to have two pipe thermostats on flow and return to store (as close as...
    • Rich d
    • Thread
    • boiler circuit doing electrician relay store thermal
    • Replies: 11
    • Forum: UK Electrical Forum
  18. G

    Thermostat swithching

    I've fitted a 300ltr thermal store a year ago and have just recently added solar water heating evacuated tubes. What I'm wanting you do next is get the stats to turn on the rads when the water achieves 65c. As the water from the rads returns it lowers the temp to around 45c while the fire is...
  19. P

    thermal constraints

    what 2 methods are they to determine the sustainability of a protective conductor for thermal constraints during earth fault conditions?? And might be a long shot but can anyone tell me what component of a RCD will operate for a .. a. line to earth fault 2.3 ohms b. line to neutral fault 0.01...
    • Phil Griffiths
    • Thread
    • earth fault neutral overload thermal
    • Replies: 17
    • Forum: UK Electrical Forum
  20. A

    Beko Condenser not heating

    hi, I have a Beko DC7110 condenser dryer that's not heating, I have cleaned out all filters etc, the heating element has been replaced(which includes thermal overload) and the front thermal overload has been resistance tested and is fine, what could potentially be the reason? Thanks

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock