touch

  1. M

    Installing touch light switches on 3-way / 4-way circuit

    Hello, I'm replacing standard light switches in my hall and landing with touch switches (not smart, just touch on/off) like these from Amazon; Touch Electrical Light Wall Switch - LIVOLO 2023 New Version 1 Gang 3 Way Modern Tempered Glass Panel Single Pole Electrical Lamp Switch with Led...
  2. xoxaunc

    Laptop lid is tingling on touch

    Facts: Thinkbook 14 G4 AIP - laptop A Thinkbook 14G4 AIP supplied power adaptor - adaptor A (65w usb-c, fake plastic ground for UK socket) is what is supplied with laptop A Lenovo T series power adaptor - adaptor B from other laptop (65watts usb-c real ground) 1. When using a socket A and...
  3. H

    LED touch mirror - correct way to switch off?

    We have had two LED touch screen mirrors installed in our ensuite. You have a touch button on the mirror to switch off and change brightness and colour. It is intalled so there is a switch on the wall as well - both mirrors are on the same switch. Hoping someone can help settled a debate - I...
  4. M

    One touch light switches

    Looking for some advice on one touch switches to for a 2 way circuit. Client is very particular and doesn't like it when switches forming 2 way or intermediate circuits enivitably end up in the wrong position. So I'm looking for switches that simply push on and then push off, similar to a...
  5. K

    Live wire touch the case of a/c

    Hello, My mother a/c got touched by live wire in the case. The a/c is grounded and the electric breaker jumped so there was a very short time short. The a/c is not functional after this short and Technion said the card is dead due to the short. Can live wire that touch the case kill the card...
  6. E

    Touch control lamps only works when switch wire is disconnected.

    I have fitted a touch control switch to a lamp, (I have done many no problem)…..However in this table lamp with a cast iron base the device does not operate when connected to the base? But when unscrewed the light turns on and 3 stage dims as it should. Any ideas welcome please.
  7. R

    Dehumidifier plug warm to touch

    Hi. I have a kenmore 1988 dehumidifier that still works great, no problems what so ever except for the other day i noticed when its left on for an extended period of time the plug gets warm, not hot. I read warm is normal, but others say its not normal and that there could be a loose connection...
  8. H

    Microwave warm to the touch when not in use

    Bit of a boring question here but nonetheless it is a concern of mine at the moment. We have a Sharp 800w microwave that is quite new. It gets very little use and today I noticed that despite it not being used, the top it quite warm to the touch. Can anyone provide some insight or advice?
  9. M

    PATting touch lights

    One of my jobs is to PAT electrical goods for a local charity. Recently we have been given some touch lights. On all of these, the switch interrupts Neutral only and Live is on all the time. Is this normal or should I condemn these lights? Thank you, Mark
  10. timhoward

    Calculating broken PEN touch voltage with backup earth electrode

    My brain has been exercised a bit by this. Am I on the right lines with this extremely simplified example: If we take: -TNCS installation with a Ze of 0.2 ohms. -Plastic services, nothing bonded, keeping it simple -Line conductor resistance from supply transformer should be similar to PEFC and...
  11. W

    Get a shock when you touch sink and oven at same time??

    I understand this could be because there is no bonding, but just want to know how it’s possible for the pipework/sink to become live?? Is it through a fault on another circuit finding it’s way to the pipework?
  12. J

    Touch Lamp LED BulBs

    I have touch lamps that came with 3w G9 Non Dimmable LED bulbs that obviously work, but are too bright i have been searching for 1.5 W LED bulbs equivalent to 15w incandescent, but only found one that works and that glows very slightly when off. all other will not work. Can anyone tell me why...
  13. mattg4321

    Brother P Touch E550W

    Bought this a few days ago and I've got to say I've nearly put a hammer through it in frustration already. The templates seem to be poor for consumer units. Not many options for high integrity and that sort of thing. I've created a template on P Touch Editor on Mac OSX but can't find anyway to...
  14. O

    Spotlights not working once they touch earth

    My problem is, I did the wiring for my outdoor spotlights, it’s to light up some trees, before taking it out , I tested it in the garage and everything is working, once one of the spotlight is coming close to the earth it cuts to power of in the house. Hopefully someone can help me with this...
  15. J

    Touch voltage to earth

    Can somebody explain if you had a 230v to earth fault the variables that determine touch voltage of a person to earth and is this voltage less the closer you get to the MET of an installation. Thanks guys
  16. C

    92 volt touch potential

    I'm really confused by this engineering article. How can the maximum touch voltage be 92 volts on a 230 volt system when in theory it ought to be 115 volts or higher? https://www.gt-engineering.it/en/en-iec-standards/iec-60364-4-41/tn-systems Huh?
  17. S

    Class 2 product?

    If you have say a metal based lamp and it’s still a class 2 product. What would happen if the exterior somehow became live. There’s obviously no path to earth?
  18. M

    Needed help to bypass touch switch on personal heater.

    I have a personal heater that has 2 touch switches. One controls power and the other controls rotation. Both don't work. How can I bypass these touch switches? Thanks
  19. B

    Can I use a touch switch for my bathroom fan and light? Like a livolo loght switch?

    Can I use a touch switch for my bathroom fan and light? Like a livolo light switch? View: https://www.amazon.com/gp/product/B073ZW5BSY/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=happyrider20b-20&creative=9325&linkCode=as2&creativeASIN=B073ZW5BSY&linkId=de8310568c94ff55b3f2887d8448c1cf
  20. N

    New Touch Control Hob Problem

    I've just purchased a new touch control hob as my old unit eventually gave up the ghost. I wired it directly into the cooker circuit just as the old one was but it refused to turn on. Nothing, not a peep. So i took it back to the retailer who, without a quibble replaced it. I wired this the same...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock