tubes

  1. simpson93

    Led tubes vs fluorescent

    Good evening guys I cant seem to find any led tubes that give out the same light output as fluorescents Anyone can point me in the right direction in particular looking for A 4ft led tube with 3k lumens+ Seems to me there's abit of a con where the manufacturers are saying 50% saving etc but...
  2. C

    Advice About Fluorescent Germicidal Tubes

    Hi, Can I use a standard fitting for the above mentioned lamp? Thanking you in advance.
  3. E

    Why do T5 Tubes in Emergency Luminaires Wear Out?

    LO All, The title says it all really. I've just tested a shed load of 11 year old emergency lights and effectively all of them have failed or failing tubes. Since the most that they should have been on is 11 x 1 hour and 1 x 3 hours per year why would a 5000 hour lamp fail? After 11 years I...
  4. D

    LED inrush

    I'm going to look at a job this week at a warehouse which requires replacing all the existing 6 foot twin fluorescent fittings with LED versions. They've requested the fittings are kept as they're relatively new so will look to bypass ballast etc. Not sure on the number but it'll be a few dozen...
  5. O

    Testing fluorescent ballasts?

    So my old mans garage has various fluorescent fittings (inc a few he got secondhand from work during a renovation) asked me to come have a quick look as the RCD was tripping when they switched on but not immediately pulled various starters and tubes, ended up pulling all the starters and tubes...
  6. D

    For Sale T12 Fluorescent tubes

    Hi, I have a large quantity of new and unused (old stock) T12 fluorescent tubes. I have over 350 6ft as well as some 5ft and 4ft available. If anyone knows of anyone who is in need of a large amount of T12 tubes please do let me know! Thanks a lot Daniel
  7. S

    Daylight Tubes

    Hi All Got a commercial kitchen in a basement without windows and natural light! Are there any H&S regs stating what type of lighting shout be used in this situation? Daylight, Cool white, Full spectrum?????
  8. M

    Fluorescent tubes flickering at ends?

    Hi Guys, I fitted a couple of these the other day: http://www.screwflix..com/p/lap-t8-high-frequency-weatherproof-batten-2-x-58w-5ft-1565mm/60410 I've used these before, and always been fine. however all the tubes seem to flicker badly at just the ends. im thinking this could be a symptom of...
  9. i=p/u

    Led

    Yo elec tec bulbs and couplers. anyone done and jobs recently in fitting out shops with leds , do you think a 1200 x 300 led panel would replace a 2 x 35w t5 ? how accurate is the data sheets to actual installing them? if you can add to this post , be my guest . Ty from a well trained...
  10. Darkwood

    Noted changes to how we recycle tubes etc ... be aware!!!!

    If your not aware the only recycling plant for tubes was built at a cost of 25million and is owned by CEF, it is not turning a profit as such so new legislation has been introduced, now as it stood before if you brought tubes back you just got charged X pence per tube returned regardless .... -...
  11. HappyHippyDad

    Is there a tube holder made for LED tubes T8?

    I'm not actually fitting any LED tubes but I like to be prepared! I cannot find any LED tube holders for a T8 LED tube, they all seem to be for fluorescents so you would have to remove the ballast and also replace the tube holder sockets. Surely there must be an LED holder? One of the threads...
  12. D

    Fluorescent tubes and metal halide lamps for sale

    i have 8 boxes of 49 watt cool white 5 foot T5 fluorescent tubes - Philips 639561 £45 per box + P&P 6 boxes of 58 watt cool white T8 fluorescent tubes - Philips 632197 £37.50 per box + P&P multiple boxes of metal halide lamps - G12 and G8.5 in various wattage Philips, Osram and General Electric...
  13. C

    Trouble-Shooting 2x18W Flourescent setup

    I agreed to take a look at shop sign for a shopkeeper friend. The fitting apparently stopped working form one day to the next. I have checked the following. 1) 240V getting to the fitting. 2) Both starters work fine in another fitting 3) Buzzed all the way round wiring loop with tubes/starters...
  14. E

    heat from floursecent tubes

    installing some 2x 35w flourescent fittings in an office and they are clearly designed for entry thru the ceiling straight into the terminals but the old ones were wired in singles in conduit so have drilled 20mm holes in lights for side feeding etc. One of them in particular has got me a bit...
  15. i=p/u

    Led replacements

    Is there a replacement led for t5 35w tubes, I know I could if searched but I like to ask like minded people.. And hello they for lighting a shop are the meeting expectations? Any experiences welcome i was going todo this job a year ago but we held off
  16. sparks1234

    Led lighting

    bit of food for thought really I have heard that if you change the wiring in a fluorescent fitting to take an LED lamp, you effectively become the manufactuer of the fitting and as such should sticker the fitting up so if the local choppy comes to replace a lamp he doesn't stick a normal lamp...
  17. Cyberprog

    LED Lighting - Equivilent of Flourescent Tubes?

    Hey All, I have a client who's about to buy up the units next door to his current warehouse, and fit it all out similar to his current warehouse and move buildings (double the size). We currently use a pair of 5ft Fittings per aisle under his mezzanine floor but we're looking at fitting...
  18. F

    Parallel wiring Fluorescent tubes basics.

    Hi all, I'm trying to build a wall of 6ft fluorescent tubes, creating an effect similar to this: http://herbertfoundation.org/media/img/xl/159_436rm.jpg I'm looking for a way of achieving this effect, spending as little as possible as I can't afford fabrication. I've been considering buying...
  19. R

    Flourescent tubes in cold weather.

    I need to replace some flourescent tubes in my workshop. They are F100W/35 with 1/2" distance between c-c of pins. These old tubes are not the best in cold weather and take a while to start. I'm wondering if new tubes of the same type will be better or should I change to something like T8...
  20. N

    LED vs Fluorescent

    Hi all, I have been asked by a local community centre for some advice changing some faulty 6ft strip lights to LED. As far as I can see 6ft LED tubes are Twice as expensive as replacing a ballast and tube but half the wattage (i.e. half the running costs). does anyone have any experience with...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock