Hi,
I am having a new patio laid next year, and would like to lay some cable underneath it in preparation for a car charger so that the installer doesn't need to run the cable around the house when it is done (The fuse board is on the opposite side of the house to the garage).
I also have an...
Hi, I think I may have helped hold the gun in the shooting of my own foot…
Been combining TP dis boards into a single board, after a workshop extension. Quite a few 4 core 1.5mm SWAs feeding fixed equipment, like TP drills lathes and the like – all fed via 16A breakers on the old board.
Lots...
hello, we have recently brought a new build house and we want to upgrade our gas hob for an induction hob, we have already brought the hob which requires 32AMP and is 7.4KW power
our house layout makes it a little tricky and expensive to rewire a new circuit through (which we should have...
Do an EICR and possible upgrade question! Domestic premises, TNCS, ZE 0.34 (yes quite close to max!) main fuse 60a and at some point the CU has been moved from garage to indoors, approx 8 meters away. No fused isolator 25mm tails and 10mm main earth.
So I put the main earth as a C3 and the...
Hey all, I've got a question about a new apartment I'm getting. I recently had a home inspection done on it and the inspector noted that my panel was double tapped and drawing what might be a little too much power for its rated size.
The apartment is a 700 sqft one bedroom and all appliances...
Hi. I have my NAPIT first assessment soon and I replaced a CU in a house which has 16mm2 consumer tails in place. I did not upgrade the tails to 25mm2, so my question is should I have upgraded them or am I allowed to leave the existing tails in place?
I do not know the rating of the DNO cut-out...
Got myself a 10-45mm step drill bit to enlarge a 32mm knockout to take a 40mm tails gland - didn't realise the test rig didn't have a 40mm knockout, nor my gland a 32-40mm converter.
Got a cheap cheerful one from Amazon, thinking it would easily fit the M12 chuck only to discover it's...
Trying to find where I can hold of what I would call plastic phase identifying lugs/grommets - blue or brown in colour and slides over meter tails to ident line or neutral (yes I know tape works too), I've tried every combination of words I can think of but keep comIng up empty.
I rent an old property so need to minimise any changes to it.
My office is a large room (6m x 7m) with a single bayonet pendant light socket which eats thru 100W bulbs and as I get older I'm finding that there is insufficient light. So I purchased some LED light panels to install over my desk...
Hey guys,
I just purchased a home that was built in 1960. It has a 100 amp service coming Into the house with only 12 breakers in the panel. A buddy of mine who is familiar with electrical keeps hounding me to upgrade the service to 200 amps. I don’t think I really need 200 amps. I was...
Hello,during the present and future downtime,folk may be experiencing,it is worth noting,that it presents an opportunity,to investigate some skill gaps,we may not usually have chance to fill.
It could be business related,or otherwise,and not limited to the keypad....in the past,i have explored...
Hi,
Got a customer who currently has an Enterview 3 system, 1 mag lock, 1 external unit and 4 handsets over 4 floors.
They want to upgrade to something more modern, this isn't my main area of expertise so looking for some ideas.
Most new systems seem to be network enabled, so poss could ditch...
Have a quote from UKPN - £10K (with us doing the trench and duct work on our property). Actually could be worse I know, but as the substation is literally across the road it is still quite pricey.
UKPN refers to ICPs who can also do the work.
Is it worth worth trying any of these, in which case...
I have a wireless texecom panel with v3.02 firmware, and I want to add a texecom ethernet connect unit but the panel has to be upgraded to version 4. I got the unit below in the connect box, so can this upgrade my panel to version 4 or do I need to buy an actual flasher unit (about £38 from...
Hi Folks,
Not been on here for a while, but something came up the other day that has me concerned to the point I thought I would ask here.
A good friend asked me if I would connect up a new electric shower for him. This is an older gent, a farmer, and as much I like to look out for him and his...
Hi all,
I have some outdoor lights, and I want to update the circuit to add a bit more functionality. I have drawn a little picture of what I have now:
When we walk past the Outdoor PIR sensor 1, all lights come on, and then go off. This works fine!
Now the behaviour I want:
Add another...
Hi
We've just moved in to a new house and it's got 3 outdoor security lights in the back garden. I've tried to trace the wiring back inside but I cannot find where it goes other than finding the ring that it's on. The plug (if there is one) could very well could be hidden under the attic...
Looking to upgrade the current consumer unit, it is located in the garage, the new cu will be in the same location. Having read various posts it appears that the Hager boards are well regarded but the MK boards not so
But my electrician is adamant in wanting to install an MK RCD board 13 way...
I have been meeting with solar system installers to install a grid-tied system at my house. Before I commit I want to verify whether I need to upgrade my main service panel.
I have been reading about the 120% rule and am not sure if my current main service panel is sufficient. Any assistance...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.