whether

  1. K

    Quick confirmation needed of whether meter wiring is dodgy or not.

    Hi. Have searched the net and the forums first for an answer but had no joy so here goes.. Quick background. My son just bought his first house which is an ex rental repo and the neighbours told us the last tennants got arrested for using the house to grow weed. I'm round here on my days off...
  2. R

    Help please to understand whether my PV system has been correctly installed?

    I have recently had installed an 8 PV panel and inverter on to my roof. This was a local authority initiative which was installed free of charge. The system has been working and reductions in my electrical usage is being assessed. I was so impressed with the reductions that I have had a further...
  3. A

    Australia choosing cable voltage rating

    Hi, for a single phase LV installation, how do you determine whether to use 450V/750V or 0.6/1kV cable. Thanks
  4. M

    UK Homeowner - advice on my electrician's status, with regards to Part P regulations

    We have had a rear extension built on our home, and our builder arranged the electrician for the electric work required. I have established that the Electrician and his helper (apprentice/junior) are from a country to the east of Europe and are not currently registered as UK electricians and do...
  5. G

    Advise on whether outbuilding should be TT’d

    Hi all first post so please go easy on me. Just to give a bit of background on myself I have been qualified for 12 years and have recently completed my 18th edition and 2391. I’ve recently been carrying out an EICR on a MOD industrial waste water treatment site. The question I have is about a...
  6. T

    Looking for opinion on whether this scenario is compliant

    Went to daughters house to replace a couple of broken sockets and did a Zs and RCD test after replacing. CU was replaced and notice on it said inspected 2015. Plastic dual RCD 30 ma/Main switch 60947-3 isolator. System is TT. (100ma RCD?) Zs at socket was 11.75 ohms L-PE 2.64 ohms L-N. No...
  7. S

    Confused about whether downlights need to be fire rated or not.

    Hi I'm sure this question has been asked before, but here goes:rolleyes:: I'm thinking about installing down lights in my hallway. This is on the ground floor of my house, and above is the first floor, all of which is my own house. There is no insulation the the ceiling void. So my question...
  8. N

    Should Electric Oven Have Switch? & Question re. Whether Need New Cert.

    Hello, I have just had a new builder with his own Electrician come in to do the following: Kitchen: - Install an electric oven. There was a switch / cable in the kitchen already for it to be connected to done by the previous builder's Electrician. - Install an electric extractor hood in...
  9. R

    Saying Hello.......

    Hi everyone, My name is Richard, I am 35 years old and seriously looking into re-training to be an electrician. I have just achieved my ECS card and am planning to work as an electricians mate in order to get some basic skills and at least earn a bit of cash to fund my training. I am currently...
  10. A

    Urgent Question about fire risk following leak

    hello, Our bathroom was installed professionally 4 weeks ago in a 1st floor flat, tonight our neighbour from the flat below came upstairs and advised us that water was leaking through 3 of his light fittings. I've captured it on video. The plumber came out and fixed the leak, however, we are...
  11. S

    Spanish Earth Road installation

    Hi, Quick question, does anyone know if there is a different spec to the U.K. for earth rods? I'm told in Spain they are longer but not sure if that is correct? Also are there any regs in Spain relating to the positioning of the rods etc (i.e. distance fro property)? Any advice greatly...
  12. C

    Clarksonevans assessment day

    Hi all I am new to this site and I am due to attend the Clarksonevans assessment day and was wondering whether anyone has attended this day before and can give me advice on what to expect for e.g. What the practical assessment involves and whether the English and Maths tests are easy? Any...
  13. S

    Earthing redundant pipework

    Hi all, scratching my head with this one so any help would be Great.basically I'm working in a block of flats, they all have gas supply pipes and installation pipework but have since had the gas within each property plugged of for one reason or another all the meters have been removed in each...
  14. R

    Nuaire Drimaster PIV - anyone fitted one and any feedback on whether they work?

    Hi All, One of my regular customers has a condensation problem in one of her properties and has asked if these units actually work? Anyone have any experience of them and can comment on models (or other brands)?? Thanks in advance...
  15. L

    DIYer query re whether a couple of kitchen/bathroom jobs are notifiable

    Hi, I'm not an electrician but I have a (hopefully) quick query whether a couple of small kitchen/bathroom jobs are notifiable? 1) There's currently a built-in and wired-in fridge and freezer in the kitchen. If the wires for the built-in units are converted into normal plug sockets for new...
  16. B

    Whether Putting a spanner in the works..

    I don't know what its like in the rest of the country but its a bit of a nightmare in the north east.. Had a productive day of pricing jobs up which has been knocked on the head as there is not a hop in hell the car is moving off the drive..
  17. J

    Been offered a networking job, not sure whether to go for it.

    Hi Folks, I've been offered a job installing some network equipment for a client of mine. I look after their electrical requirements generally but have not much experience in networking. They have a couple of offices and a couple of shops and they want to hook them all up as an internal phone...
  18. M

    upgrade meter tails, or downgrade main incoming fuse??

    hi guys hoping you could give me your thoughts, i am pricing for a consumer unit change, its an old fuseboard with re-wireables. it has 16mm meter tails, but it has a fairly new looking 100A main fuse. its a small-ish house..... 2 ring mains, 2 lighting radials, a couple of sockets in the...
  19. Dean Williams

    touch voltage help

    Hi all i'm currently testing a very large office complex on nights. in the boiler house, there are some boilers fed with SY flex. As per usual, the SY braid has not been bonded. When i tried to test for continuity to the braid i found 23v ac on the braid, only with that circuit switched on. is...
  20. O

    Contencious - is solar worth while

    My brother is seriously considering having solar panels on his house. The roof is facing south, south west, and is not obstructed. How would he be able to decide if its worth it or not?? Yes this sounds a daft statement!! He lives in the Leighton Buzzard area.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock