won't

Recent contents Top users
  1. S

    Zanussi Lindo 300 Tumble dryer has power but won't run

    Hello all, A newbie to the forum here but looking forward to learning things from you all. I've got a Zanussi Lindo 300 tumble dryer, Model ZDC8202P. The info label states Type TC09H65HW, Prod No 916 097 379 00, 230-240V, 2800W. I've done a lot of searches for common faults similar to mine...
  2. S

    Dangerous Video Youtube won't remove: Join electrical cables the pretty way

    Came across these videos on youtube. Do you think this is safe? Reported many times myself but it is still there. Perhaps if you agree you could report them as well. Vid 1: Vid 2: Ironically they are promoting Safer Internet Day as well boasting about removing harmful content. Shame...
  3. F

    Need Help: Mechanical Chime Won't Ring After Transformer Replaced

    Hi. Here's some background info. I am located in the United States, and have had a Nest Hello video doorbell working perfectly for a couple of years. It's powered by a 16V 10va transformer. I also have a mechanical door chime that rings when someone presses the button on the Nest Hello. The...
    • ftresi
    • Thread
    • after chime doorbell help mechanical need help replaced ring transformer won't
    • Replies: 14
    • Forum: DIY Electrical Advice
  4. J

    Well Pressure Switch won't cut out.

    My well pressure switch would not cut out so I replaced it with a brand new one (on at 40 lbs, off at 60 lbs) and made sure my pressure tank was at 38 lbs. No Joy. I tested all wires and found that all connections except one were 120v, as they should be. The cut off switch wire is at 48v...
  5. S

    Candy Dryer won't turn?

    Hello all, I have a candy Free-standing dryer GCC 591NBB-80. However it wont turn, it just makes a strange noise when I press it on. If I manually turn drum with my hand it turns very freely. Really would like to see if I could repair it rather than get someone out. Any advice please...
  6. C

    Oven won't switch back on

    Ok, so basically I turned the oven off at the wall when we went away for our honeymoon, came back yesterday switched it back on and now have no power at all. I've checked fuse box and the plug attached to the switch works, but other than that I don't know what else I can do before calling out an...
  7. K

    1992 Pontiac Firebird won't crank, no power to starter enable relay, no security light, temperature gauge fluttering

    My 92' Firebird that I just acquired will not start. I bypassed VATS security with resistors so the security light now shuts off. I replaced my positive battery lead that was shot and the only thing that happens when I turn the key is the temp gauge fluttering. The relay only has 0.5 constant...
    • kalgran
    • Thread
    • gauge light no power power relay security starter temperature won't
    • Replies: 4
    • Forum: Auto Electrician Forum
  8. A

    Attic Fan motor won't run

    I have an attic fan on a thermostat. I can hear it turn on; but, the motor hums but the blades don't turn. There is nothing obstructing the blades and they turn by hand. Don't know where to start.
  9. P

    Smeg Opera A3 Main Oven Won't Turn On

    My Smeg Opera A3 has just developed a fault with the main oven. Nothing works at all. Fan, oven element, grill element lights - all dead. I've changed the main oven element before when that failed but it's clearly a different problem. Any suggestions where to start? Thanks.
  10. naylorpd

    3 phase RCCB tripped, won't reset

    Hi, in my garage I have a 3 phase RCCB that has tripped and I just can't get it to reset, even with all the downstream MCBs switched off. Bit of a nuisance really as mother in law has no power to her flat above the garage and the garage door and front gate don't work. I tried uploading photo...
  11. Lister1987

    Megger 1730 won't complete IR dead test at any range

    As title, playing with test rig and running through dead tests; conductor continuity passes fine but if I try and do any range IR test it just won't have it. I've tested the dead short to verify leads are ok and they are, I can't figure out why it's not running the test, it's a dead rig so no...
  12. P

    My RCD won't reset after testing

    my RCD's wont reset after testing. I have 6 RCD in my fuse box all in a row (and only 4 MCB - which doesn't seem usual). After pressing the test button, the RCD triggers. The RCD won't however allow itself to be reset. I have tried resetting with all the MCB turned off as well as all...
  13. E

    Dishwasher Siemens won't start, instead the on/off button beeps.

    Hi, I am totally desperate, looking for advice. With the Covid, nobody wants to come home to repair my dishwasher. It is a Siemens SN65E003EU/43. I had a problem with the draining pump which I remove and cleaned. Once I plugged it back in, nothing happen and the dishwasher won’t start...
  14. F

    ISE 10 W256W (ASKO WM70.1) washing machine won't turn on

    Can anybody please offer any guidance with the following problem. The power button doesn't work but when turned off at the socket, left a few seconds and turned back on, the lights briefly come on. The history so far is here.
  15. F

    UK I replaced the light and now my heater switch won't switch on.

    Hi I replaced few of the lights 4 to be precise 2 downstairs and 2 upstairs and now my heater won't turn on. Is it just the coincidence? Did I make a mistake? All the other socket is working but the switch next to the heater won't turn on. I replaced the fuse.. also, if I am correct, light and...
  16. S

    Error codes won't stay away

    So here are the 3 trouble codes P0443 P0141 P0135 P0141 O2 Sensor bank 1 P0135 02 Sensor bank 2 P0433 Evaporative emissions system purge control valve circuit. There is a bit of a sad story behind this. A friend owns an xc Barina and her heater wasn't working. I offered to check her...
  17. M

    WiFi switch won't work. Two lights two wires. One switch

    Hey guys So I tried to change my light switch today to a WiFi on When I took the switch out there were two live wires. One brown and one blue with a brown casing on it I hooked up the wires as stated and that were similar to what the origin Al switch was set up to The power came on the...
  18. velmareth

    Just don't understand why SELV pullcord won't work

    I've recently purchased a SELV pullcord extractor fan for my bathroom. I checked and 12v are running through where the old fan was so an SELV should work perfectly. I've wired it up as per this photo, but it doesn't work when I pull the cord. Could anyone help me understand why? The current is...
  19. D

    Emergency light won't switch off - correctly wired new lights.

    Hi, here's a good one - replaced 15 E-lights recently, (tube type replaced with Newlec led type), and noticed one of the old outside Thorn 2D E-lights was on when driving past a few days later. The Thorn lights are all up to spec and function as they should. Went to investigate and it seems that...
  20. D

    New cooker dp switch, existing wires won't reach terminals..

    Evening all, Not a qualified spark so I thought it better to ask than make assumptions. Swapping all switches/sockets in our house to screwless ones, all going fine until I went to swap the cooker isolator switch. The old one has feed top, load bottom. The new one has load top, feed bottom. As...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock