zones

Recent contents Top users
  1. V

    which hive for 2 x heating zones? (upstairs and downstairs)

    i , i have a property to work on which has a programmable room stat upstairs and a programmable roomstat downstairs. S plan system , 2 zones. hot water is just straight from the combi. Haven't wired a hive for a while, and not up to date with their current versions. The customer requires control...
  2. aidanmcg33

    One external source split into multiple zones

    Our house has one external feed going outside to power lights. We've recently renovated our garden/drive etc and now there are three different zones where we would like to have lights and control when they are on/off. With one source going outside and one switch, I was wondering if there is...
  3. T

    Jointing cable in wall to be filled and wiring zones

    Hi all. This is my first post on here so hopefully some of you will be able to suggest something other than my ideas. Worked as a spark for 19 years but mainly commercial so you guys will have better ways of doing domestic. here's the question. Ive got a job in a Big detatched victorian house...
  4. T

    swimming pool zones.

    contractors have installed a pool cover and have situated the isolator and the junction box at just above 2.5m but the conduit running between them with the 230v cable in it goes down to 2.47m at its lowest point. Is that allowed or is it pedantic? please see poorly drawn diagram for more...
  5. B

    Safe zones and Earth cables

    I've been told I need to upgrade the main earth bonding to 16mm. The consumer unit is on the wall adjacent to the externally mounted incoming supply box - I basically need to run the earth wire down the corner about 1m and then across the side wall about 30cm then through and into the back of...
  6. M

    Which wiring centre? 1UFH zone plus 2 radiator zones

    Hoping someone knows of a product that can be used for a single UFH zone with 3 heads and two radiators zones. The heat miser UH4 can use zone4 to control a single radiator zone valve with the dip switch set so not to engage the manifold pump. But it doesn’t seem to have a any ability to do...
  7. Jb1410

    Bathroom zones and ip ratings

    I’m currently upgrading my bathroom suite and was wanting to remove the old style pull chords style switches for the fan and light for a switch. They will be mounted well outside the zone 2 area in the bathroom so do I need to take any ip rating into account as well. Many thanks
  8. T

    Heated towel rail & zones

    Hello, a friend has asked about fitting an electrically heated towel rail in their bathroom. The location is on the wall opposite the bath in a narrow bathroom. There is an existing spur available high up on the wall that used to power a heater that has since been removed. This could be...
  9. timhoward

    Zones and sockets

    Regarding the "sockets allowed 3m horizontally from the boundary of zone 1" reg...something I've never had to consider before as most UK bathrooms wouldn't be big enough! Looking at this plan from OSG Does the 3m only apply in the direction of my red arrow, or does it arc around in the same...
  10. dokkan1080

    Bathroom zones washing machines

    Are washing machine allowed in a bathroom if they are outside of zone 2 and go into a flex outlet thats fused outside the bathroom? And for good measure its in a cabinet?
  11. B

    Prescribed wiring zones

    Hi all regarding prescribed wiring zones. Are these wiring zones only relevant to domestic installs ? Or even installs that are supervised, such as a hotel or restaurant? Thanks in advance
  12. D

    Pump (and boiler) on even though all zones off

    We have an oil-fired boiler and a three-zone programmer. Some of the time it works fine, but not infrequently we get the following scenario. 20.30 last night: Programmer switches on the upstairs heating and the water heating. OK. 21.00 Programmer switches off the upstairs heating and the water...
    • Deleted member 134500
    • Thread
    • boiler central heating pump though zones
    • Replies: 2
    • Forum: Central Heating Systems
  13. S

    Who cares about zones

    Found this today on an EICR been like this for over 8 years.
  14. S

    Is a socket in a cabinet outside the zones in a bathroom?

    Got a customer who's wanting a washing machine and tumble dryer in the bathroom. Normally the solution is to hard wire into FSUs but he's come up with the solution of kitchen units and a work top with the sockets in the void between the wall and the back of the units. Could this be argued to...
  15. S

    Cable zones on a staircase

    I want to add lights up my stairs like this, never come across this before would wiring point to point be classed in a zone with it running on the stairs or will i need to bury it in conduit? Thanks
  16. C

    Zones in stud walls

    Do zones have to be adhered to in a stud wall? The stud is 70mm with 60mm 30mm board on one side and 47mm on the other side
  17. O

    ADE optima Compact G3 set entry/exit time on multiple zones

    Hello I’ve recently had to rewire my home alarm system as the engineer who installed it did such a shoddy job that all the cables were hardly in and causing the system to trigger every couple of moments. I’ve recently been able to get the system working correctly however, I am unable to set...
  18. B

    EEx ia Equipment in Zone 2 Area

    Apologies if this appears like a simple question. I have carried out a survey of a Zone 2 area and one piece of equipment, an enclosure, is fitted and only identifiable by manufacturers name plate and a stuck on EEx ia sticker. No Atex data plate. The previous survey (visual) gave some...
  19. E

    Electrical Zones

    Hi, I am in a debate with a friend who is also an electrician who is backed by his boss in this. Now I am aware of all the electrical zones like - 150mm from a ceiling and 150mm from the corner of 2 adjoining walls or partitions and horizontal or vertical from any accessory or switch gear. But...
  20. Thomas Connolly

    Cables and Zones

    Hi Gents, Probably a very simple answer but I'm installing an outside light on a small porch The switch being just inside the door. The light however, is about 600ml from the door on the outside, so if I drill straight through from the outside to the inside, once inside, the cable exit point...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock