2A ROUND 3 PIN sockets issue. Please advice.

[macmac]

Hello.
I just moved to a new flat to discover that all the rooms have floor lamps connected to wall light switches.
I googled and found that these are 2A round 3 pin sockets, used in old flat for lighting circuits.
I would like to swap the floor lamps for new ones, but still be able to use arrangement with the wall switch.

My question:
1. As I understand new lamps come with regular 3 pin square plug. Is there an adapter that will allow me to buy regular lamps and use the old sockets?
2. Can I take apart the old plugs and fit them to the new lamp cables? should it be a problem?
How about grounding, both old and new have 3 wires?

Thanks in advance for your help.

 

[andyb]

Hello.
I just moved to a new flat to discover that all the rooms have floor lamps connected to wall light switches.
I googled and found that these are 2A round 3 pin sockets, used in old flat for lighting circuits.
I would like to swap the floor lamps for new ones, but still be able to use arrangement with the wall switch.

My question:
1. As I understand new lamps come with regular 3 pin square plug. Is there an adapter that will allow me to buy regular lamps and use the old sockets?
2. Can I take apart the old plugs and fit them to the new lamp cables? should it be a problem?
How about grounding, both old and new have 3 wires?

1. No

2. Yes, but you can buy new 2 amp plugs at any electrical wholesaler.

 

[macmac]

1. No

2. Yes, but you can buy new 2 amp plugs at any electrical wholesaler.

Cheers Andy!
Sorry for the stupid question, but can these 2A hold powerful floor lamps (100W)?
It just that 2A sounds a bit weak, and I read it was meant for night stand lamps.

Thanks.

 

[andyb]

Yes, 100w is less than 1/2 amp