Discuss Anyone installed a DYGIZONE lighting control system? in the Electrical Tools and Products area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

H

hursty

I have been called to a customers property and they have a controlled lighting detection system with PIR sensors and external lights.
They are having problems with lights not staying on and flicking lights.
They have two GJD DYGIZONE controllers in property and I have noticed both are operating as master controllers.
I was wondering whether anyone has installed these units?
Without anymore investigation I am presumming that the one controller is wired wrong and should be acting as the slave.
I will be returning to property soon and was wondering if anyone has any advise on these units?
From my brief visit I am alittle puzzled as the installation of the controllers are both wired from the control box rather than out to master and then master to slave.

Any tips or advise would be much appreciated before I visit this job.

Thanks

P.S sorry if this is in wrong section as alarms etc is private, so wasnt sure.
 
hursty

i have only ever installed a GJD system once

It was 2 2 zone units interconnected to 2 key pads but have not any issues with them

You could always disconnect the so called slave controller but i do not see this as a issue, the pirs operate a contact inside the main unit to turn on the lights, perhaps the main unit is faulty ?
You can also press the number button on the keypads to over ride the pirs to see if the issue is with the lights themselves

Google GJD DYGIZONE for wiring diagrams :)
 
hi ashrow, thanks for response. I think I will start with what you mentioned, by disconnecting slave controller and see where we go from there, as the button function works fine to switch the lights on and off manually.
and get inside the main unit and check against wiring diagrams.

If the main unit is a different manufacture do you think this could be an issue? As i know the controllers were installed at a later date to the main unit and PIRs. untill i get there im unsure.

Thanks again
 

Reply to Anyone installed a DYGIZONE lighting control system? in the Electrical Tools and Products area at ElectriciansForums.net

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock