P
provr6
I have split roofs and an Sma 3600 TL inverter and have only just looked at it properly. When the on screen display switches between input A & B, input B registers 0v and 0A although the power figure changes. (input A registers about 360v)
It is cloudy at the moment and no sun in the sky. Is anything wrong or could all the panels be connected to one input? (There looks like there are 4 cables going into 2 different locations). I would be very surprised if they were all connected together as I discussed this with my installer and is the reason for using a dual inverter.
Your advice will be much appreciated.
It is cloudy at the moment and no sun in the sky. Is anything wrong or could all the panels be connected to one input? (There looks like there are 4 cables going into 2 different locations). I would be very surprised if they were all connected together as I discussed this with my installer and is the reason for using a dual inverter.
Your advice will be much appreciated.