Discuss Are the bloody Regs statutory or not? in the UK Electrical Forum area at ElectriciansForums.net

oracle

-
Esteemed
Arms
Reaction score
413
As of 1 January 2005 it is a legal (statutory) requirement for all work on fixed electrical installations in dwellings and associated buildings to comply with relevant standards. The relevant UK standard is BS 7671 2018 (Non statutory)

The EAWR (statutory) says that compliance with BS7671(Non statutory) will mean compliance with it.

The Building Regulations (statutory)

Approved Documents are intended to provide guidance for some of the more common building situations. However, there may well be alternative ways of achieving compliance with the requirements. Thus there is no obligation to adopt any particular solution contained in an Approved Document if you prefer to meet the relevant requirement in some other way.

So where does that leave us? Best is stick to the Regs and treat them as statutory (even though they're not) and you can't go wrong. They are the code we live by.
 
If you stick to the relevant British standards in whatever work you undertake be it fire alarms,emergency lighting and electrical installations then you can’t go wrong.
 
I sometimes think they left it like this to ensure IET retain copyright and revenue for these regs - if they were l-a-w they'd need to be freely available I think (?).

Ah, I remember these discussions now.
I came to the conclusion that if the Regs were 'Law', they would be at least 10 times bigger. They'd have to be total water tight without a single loophole in them. You'd need to be a trained lawyer to understand them. No 30 hour training course to get your 18th :D
 
It's comparable to the ISITEE position, where people often ask "Do you have to have portable appliance testing by law?" Of course, you don't, however you do have to comply with EAWR. Following the Code of Practice 4th Edition is the recognised and established way to maintain equipment and as far as is reasonably practicable, prevent danger.

There may be other ways to achieve the same end result, however (a) why try to reinvent the wheel? and, (b) there is a likelihood that said reinvention would appear wheel-like and closely resemble the existing CoP...
 
Pete, get a grip and lay off the Mogadon
I stated 3 times that they are not statutory, it's just that the EAWR and Part P think they are.
Just adding my pennies worth no need for derogatory replies Mate, Oh sorry forgot you are the oracle after all didn't mean to spoil your thunder.
 
Last edited:
This is the old logic chestnut.
A implies B is a known fact.
From that it does Not follow that B implies A
In this case compliance with bs7671 implies compliance with part p. But compliance with part p doesn't imply compliance with bs7671.
 
Why does everyone think Pete is ****ed when he gives an incoherent reply?
Don't think he is thinking I'm P//sed Ant just taken a sleeping tablet. Maybe he just needs to take stock of what he is saying, thanks for your support anyway.
 
Just adding my pennies worth no need for derogatory replies Mate, Oh sorry forgot you are the oracle after all didn't mean to spoil your thunder.
What derogative? You're the one who said you use Mogadon as a recreational drugiin another post after all.
Lighten up, it's just one old Fart taking the pi$$ out of another.
 
Last edited:
What derogative? You're the one who said you use Mogadon as a recreational drugiin another post after all.
Lighten up, it's just one old Fart taking the pi$$ out of another.
Deleted
 
Last edited:
fine mate. just woke up for a smoke and a brew. letting dogs out for wee wees.
 

Reply to Are the bloody Regs statutory or not? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi fellow sparks, I've just started out on my own so I'm spending a lot of my time trying to find out the correct way of doing things of...
Replies
13
Views
789
Hi guys, I've gotten AI to write up a terms and conditions for my company and then went through it with AI and tweaked it to make it sound a...
Replies
3
Views
341
I've just stumbled across the below elsewhere online, anyone aware of it? PRESS RELEASE: ELECTRICIAN’S GUILTY PLEA OVER REPORT SIGNING OFF...
Replies
40
Views
6K
Morning all So the site I'm based at recently had some work done (think partitioners). This package of work included electrical. This was...
Replies
44
Views
8K
Hi all We've had some works done in our kitchen which has involved fitting a new cooker circuit, installing some downlights to replace ceiling...
Replies
12
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock