Auxiliary sounder on Twinflex pro panel

[peterinreading]

I am replacing an old Fike Twinflex panel with a new Twinflex Pro panel. The old system had an auxiliary sounder but there seems to be no where to attach it to on the new panel.

Any ideas?

 

[Leesparkykent]

Page 16 of the manual http://fireandelectrical.co.uk/engi...x Panels/Twinflex Pro Installation Manual.pdf

 

[peterinreading]

Thanks very much Leesparkykent.

So if I understand correctly I should use a "remote sounder" on a "monitored output" circuit with a 10kΩ EOL resistor. I'll give it a try.

 

[Leesparkykent]

Thanks very much Leesparkykent.

So if I understand correctly I should use a "remote sounder" on a "monitored output" circuit with a 10kΩ EOL resistor. I'll give it a try.

That's the one

 

[peterinreading]

Implemented as suggested by Leesparkykent and it worked fine.