Board change?

[paulthemagpie]

Hi,

Recently been to a property that requires a board change but got no main switch. Usually the service fuse has no tag (lol) so i simply remove fuse crack on an re insert.

today i came across one were it had a big steel covering. On the PIR it had been picked up as "unable to access supply fuse"

What do you guys do in this instance?

 

[telectrix]

edited due to the fact that the OP is not competent.

 

[Pete999]

Hi,

Recently been to a property that requires a board change but got no main switch. Usually the service fuse has no tag (lol) so i simply remove fuse crack on an re insert.

today i came across one were it had a big steel covering. On the PIR it had been picked up as "unable to access supply fuse"

What do you guys do in this instance?

Get the DNO to come and fit an isolator

 

[paulthemagpie]

remove tails from meter, then do your board change. reseal meter or get dno/supplier to do it.

what remove them live?

 

[Octopus]

what remove them live?

Absolutely not. Post 3 is your best option

 

[Guest77]

Hi,

Recently been to a property that requires a board change but got no main switch. Usually the service fuse has no tag (lol) so i simply remove fuse crack on an re insert.

today i came across one were it had a big steel covering. On the PIR it had been picked up as "unable to access supply fuse"

What do you guys do in this instance?

I suggest you call an Electrician Paul, I feel you may be struggling a little mate due to your last few posts made of the forum, you seem a little unsure and you may drop a major clanger if you are not careful.

 

[snowhead]

Is that a Big steel covering as anti vandal or does the O.P mean a Cast Iron head?

Just curious, but the DNO is the answer to whichever.