Change of career

[Guest111]

This thread should be in the arms.

pub anyone?

 

[trev]

Guys, I think we should leave these two to their delusions of adequacy. Don't let them wind you up and get a ban, that way we will lose a couple of quality guys.

 

[bigbaddave]

I had a lad at college, thick as pig you know what.. Anyway passed every multiple choice paper he had in the 3 years (Except 1)

When we asked his method he says he flags all the questions he doesnt know and then just ticks the same for each question (ABCD) Ect.. Did the job.. Law of averages you will allways pass the multiple choice papers after enough attempts

 

[Geordie Spark]

If it aint mate if it carries on i'll be well on my way to the 3000 club by morning lol.

It's closed bonny lad.

They're inviting tenders from demolition contractors to knock it doon.

 

[Thomas240280]

Just BS7671 is needed to complete the first course. Good luck learning it in one day.

Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?

 

[Geordie Spark]

you dont need books - the exams multiple choice.
just give your answers as ....
A
A
D
C
D
B
B
A
C

you've got a 25% chance of passing with no effort at all , result !
;-)

Aye .... it worked for me ! :cowboy:

 

[SPARTYKUS]

Keep it up Thomas it's keeping me entertained ;-)

bandq book is a bit too advanced there are some leaflets at Wickes which will do. All the tools you need are pliers and 2 screwdrivers ( one of each sort , yeah?). For most jobbies anyway.

 

[KAS1]

When I sat my C&G the results were 1 - 2 Distinction 3 - 4 Credit 5 - 6 Pass 7 - 8 Plumber lol

I never said I knew it all, hence why I asked what book I need to revise from and that I would book the day off before exam

 

[Geordie Spark]

Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?

Hang around here for much longer bonny lad and somebody will tell you !! :yes:

 

[Plonker 3]

Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?

Yes of course that do, we all very often refer to them leaflets when unsure on what we are doing.






*May contain lies.

 

[ian.settle1]

Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?

Yeh go to the Screwfix forum you will get a lot of info there.

 

[Geordie Spark]

Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?

I believe Readers Digest published a book with all the answers to electrical issues.

Maybe you can buy it on E-bay?

 

[markc123]

Im guessing the screwfix forum is full of the nonsense IT SPARKY was coming out with? Never properly had a look, bet some of the electrical knowledge is a laugh...may have a quick scout on it for amusments sake lol.

 

[MDJ]

I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise

Yes they sell plenty of paint, natural calico is good for making a room look bigger, try that.

 

[Thomas240280]

Yes of course that do, we all very often refer to them leaflets when unsure on what we are doing.






*May contain lies.

So where are the leaflets too? I haven't noticed them before, I going to get in contact with the nearest college tomorrow and see if I can sit the nic exam.

 

[Plonker 3]

So where are the leaflets too? I haven't noticed them before, I going to get in contact with the nearest college tomorrow and see if I can sit the nic exam.

I usually ask at the customer information desk for the leaflets, tell them you need the ones that comply with BS7671and they will give you loads of info on it.

 

[markc123]

Thomas out of interest what is your day job? Your IQ seems that low i can't actually seem to classify / envision you as anything.

 

[ian.settle1]

Thomas out of interest what is your day job? Your IQ seems that low i can't actually seem to classify / envision you as anything.

Don't you start as well in another posting he has said he is a FLT driver

 

[Geordie Spark]

I'm thinking that these days this forum should have some sort of warning on the opening page ....... Something along the lines of: "Warning - may contain nuts".

 

[MDJ]

I bet the Staff forum is busy at the moment haha