Changing Wireless to Hard wired UFH

[dawsirn]

Hi,

I have a customer who about 10 years ago had a Wet underfloor heating system put in with Wireless Stats which talk to the wiring centre and opens the actuators when required.

The customer has for a while had problems with the wireless stats starting to play up and has asked about biting the bullet and changing them all to wired stats.

I assume this should be pretty straight forward but was wandering if the existing heating manifold with actuators can stay in place but just connect them to the new wiring centre?
It's a Rotex system at the moment.

Thanks.

 

[Leesparkykent]

Should be fine..just make sure you get a compatible wiring centre if the actuators are 230V or 12V etc.

 

[Octopus]

Call the manufacturer direct for their assistance.......... most are more than happy to give advice.......

 

[dawsirn]

OK thanks, forgot to check if they were 12v or 230v. Best arrange another visit!

 

[Leesparkykent]

OK thanks, forgot to check if they were 12v or 230v. Best arrange another visit!

can't you get the customer to take a photo of any info on the actuators so you can look them up online?

 

[dawsirn]

can't you get the customer to take a photo of any info on the actuators so you can look them up online?

I actually took photos of them my self but there's no info stamped on them at all. No big deal though.