Discuss Continuity Tests in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

P

PLW

Is the continuity test for circuit protective conductors, the same test for ring and radial circuits or is there a different test for each type of circuit?

Also what is the difference between testing for cpc continuity and testing for continuity for ring final circuit conductors?
 
Hi, do you have access to the trainee section.? You question is too broad to give an answer too, try and be more specific which test in particular do you require help with. But yes radial & ring testing are very diferent
 
Hi, do you have access to the trainee section.? You question is too broad to give an answer too, try and be more specific which test in particular do you require help with. But yes radial & ring testing are very diferent

I thought this was posted in the trainee section?
 
This is posted in the Electrical courses and NVQ section (just above the training section, for which access is required)

The two tests are different:
A radial circuit, with line and cpc linked, is tested for continuity at every point of use of the circuit and the maximum resistance (at the end of the circuit) is R1+R2.

A ring circuit has the end to end resistances measured to get r1 and r2 (and rn), then the ring is interconnected in a figure of 8 and the resistance between line and cpc measured at each point of use. Every measurement should equal (r1+r2) /4 and this is also R1+R2.

View attachment 35639
 
No, just impressed with some of the graphics people post on here and just wondered what software people were using to create them in the first place.
 

Reply to Continuity Tests in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Similar Threads

I have got these questions on 2391-52 inspection and testing but can't remember option of 1st two questions. Please any suggestion will be...
Replies
2
Views
630
Hi All Happy new year to all! First post but long timer lurker, so thanks for all the previous help! Just wanted to clarify something I have...
Replies
7
Views
808
I had an interesting little job this morning. Three sockets in an extension were not working and haven't worked for quite some time (years). It...
Replies
0
Views
227
I'm practising EICRs on friendly locations as I'm still in training - technically done my 2391-52 but frankly need loads more practise. I've just...
Replies
11
Views
759
Please advise what I should test / check next. My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Replies
45
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock