Crossed Polarity smart meter into mains

[Octopus]

As Strima has already outlined. Yes, in the perfect world where everyone practices safe isolation and assumes nothing, then it should not ever happen that a person touches anything that is live. But, seriously, have you never touched a neutral without putting your tester on it? Never?? And of course, there is the risk to those who do not practice such things, it might not be right, but it happens, and under those circumstances it is very dangerous. You can't live in a perfect world, because the world is not, perfect. I don't believe any spark that say's he has never ever touched a neutral without testing it.

Please read my reply again .....................more carefully.

 

[Strima]

I don't believe any spark that say's he has never ever touched a neutral without testing it.

I have, gave me right tingle and I haven’t done it since.

 

[Spoon]

I have, gave me right tingle and I haven’t done it since.

Apparently it tingled soo much it maked you hit the 'Post Reply' twice..

 

[Pete999]

Apparently it tingled soo much it maked you hit the 'Post Reply' twice..

Made Crikey Spoon you been on the booze

 

[Spoon]

Made Crikey Spoon you been on the booze

haha Was distracted by daughter asking me to hold her ice cream.... I was a good dad and didn't scoff it.... Took all my willpower though...

 

[Pete999]

haha Was distracted by daughter asking me to hold her ice cream.... I was a good dad and didn't scoff it.... Took all my willpower though...

I'll believe You Spoon, just

 

[Spoon]

I'll believe You Spoon, just

It was one of those magnum type... I really like them..

 

[Strima]

Apparently it tingled soo much it maked you hit the 'Post Reply' twice..

Wibble...

 

[johnduffell]

Tell me how its "dangerous" in a normal domestic installation?

All protective devices in the neutral is a good enough reason for me.

 

[PEG]

Knew i was right to leave that old fused-neutral head alone...

 

[HS2018]

Thanks for all the responses...

Our electrician sent a report to our supplier, along with our complaints letter, they’ve said they’re awaiting their contractors report

We should have an update Wednesday from the suppliers contractors.

Just wondering what anyone thinks the outcome of something like this would be?
Obviously not savvy on the electrics side and what would happen- eg will the contractors get a fine/energy supplier? Interested to know thoughts, cheers

 

[DPG]

Thanks for the update.

 

[Des 56]

I would not be surprised if every electrician on this forum hadn't at one time or another connected something up backwards

The negligence arises because it was not tested after completion
Whether reverse polarity is the danger that some perceive or not, the situation should never have arisen where a job was incomplete through lack of testing

I would also not be surprised if the contractor pressurised the workforce to bang as many out for a pittance payment faster than was reasonable

Lets not just hang the electrician,the people above who screw every penny they can get from the working man is equally to blame,but like all other occasions,its the guy on the job who takes all of the blame as highlighted throughout this thread

 

[Rpa07]

Meter fitter @Des 56 not electrician. Our electrician highlighted the polarity issue when checking for dead circuit and found it live.
I conclude - it was the meter fitter in the hallway with the 25mm tails (reversed)

 

[HS2018]

Update of investigation will now be tomorrow/Friday from the energy suppliers.

Have had the Manager of Trading Standards phone me this evening for photos/ electricians report. Didn’t expect to hear personally from them!

Hopefully will hear from suppliers without too much chasing