Desperate for help - Veritas R8 alarm

[Tammy Johnson]

Hi there, could anyone please offer some advice on the following?
We had a power cut on our street and when the leccy came back on our alarm went off and it took ages to stop. Anyway, now when we enter the house the alarm goes off immediately. I have tried doing the following but it's not working with codes 1234, 4321 or 1111. Any help would be much appreciated!

Enter Engineer code...press program..pres 33....enter number of second ie 30 = 30secs. to exit press reset twice.

Many thanks,

Tammy

 

[telectrix]

first thing i suspect is the battery. check with a meter. both connected and disconnected. then you need to crash the panel to factory default settings and re-programme as required.

 

[Tammy Johnson]

Thank you for replying. But will replacing the battery allow me to adjust the timing? And how do I crash the panel?

 

[buzzlightyear]

Thank you for replying. But will replacing the battery allow me to adjust the timing? And how do I crash the panel

no, I wont .because the brains will remember .

 

[Tammy Johnson]

no, I wont .because the brains will remember .

I don't understand!

 

[buzzlightyear]

battery allow me to adjust the timing? And how do I crash the panel?

what are going to do, adjust the timing ?

 

[buzzlightyear]

come back rubber duck!

 

[telectrix]

I don't understand!

none of us understand buzz. he's from a different planet.

 

[buzzlightyear]

none of us understand buzz. he's from a different planet.

that make two of us then .

 

[Corbs]

has this my self ring texecom up

they will go through it with you how to reset one of the pir sensors not to go off straight as it sees movement

also sounds like you need to replace the battery cheap and easy enough to do (only lasts around 6 hours with no power)

 

[buzzlightyear]

has this my self ring texecom up

they will go through it with you how to reset one of the pir sensors not to go off straight as it sees movement

if you ring. up they will ask are you a engineer ,before they will give out information.

 

[Tammy Johnson]

if you ring. up they will ask are you a engineer ,before they will give out information.

So do I (or my hubby) need to pretend we are engineers?

 

[Tammy Johnson]

has this my self ring texecom up

they will go through it with you how to reset one of the pir sensors not to go off straight as it sees movement

also sounds like you need to replace the battery cheap and easy enough to do (only lasts around 6 hours with no power)

Thank you for your help! Much appreciated.

 

[Corbs]

if you ring. up they will ask are you a engineer ,before they will give out information.

Not when I phoned up talked me through it there a then took less than 2 mins to do

 

[Tammy Johnson]

Not when I phoned up talked me through it there a then took less than 2 mins to do

That's great, I will give them a eing, thanks again

 

[buzzlightyear]

That's great, I will give them a eing, thanks again

if you are not reg with them ,you might not get the answer .

 

[Tammy Johnson]

Hi, I rang Texecom and they very helpfully gave me instructions. It's fixed!!!! Thanks again for your advice.

 

[Corbs]

Hi, I rang Texecom and they very helpfully gave me instructions. It's fixed!!!! Thanks again for your advice.

That's great

 

[buzzlightyear]

well done tammy lee jones .and I had a bucket of pop corn for this one .

 

[Tammy Johnson]

Hi, I rang Texecom and they very helpfully gave me instructions. It's fixed!!!! Thanks again for your advice.

well done tammy lee jones .and I had a bucket of pop corn for this one .

Yes it's riveting stuff isn't it? Hope it was sweet and salty popcorn, that's the best one.