Discuss Dimmer switch wont fit! in the Industrial Electrician Talk area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

a few pence will buy you a frame which sits behind the switch and lifts it off the wall about 6 or 7 mm so any dimmer will fit into a shallow box. You will probably have to use longer screws and maybe re-thread the lugs in the box. I used to chop new boxes in until i found these. I know CEF stock them and they save a lot of hassle and don't look unsightly either.
 
You can get a remote dimmer that will fit, loads of places sell them. About 50 quid for a nice chrome/plat/satin. I love em, 10mins fit
 
Although depth of box is an issue with the actual fitting of the dimmer, it is also recommended due to heat build up.

This is why you can only get most 2 gang dimmers rated at 250w a side.
 

Reply to Dimmer switch wont fit! in the Industrial Electrician Talk area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock