Discuss Disappearing voltage under load in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
6
Hi all, quick one that I’m guessing one of you guys will solve quickly! Currently been doing some work on an old wartime building and trying to get power back onto some son floodlights after some demolition work internally, I’ve got 240v across line and neutral at the junction box (that’s presumed went to the old outside lights as a perminant supply as the lights have built in photocells) but as soon as I connect L+N of the load onto the supply the voltage disappears when I put the test meter on it then when I remove the load the voltage comes back! Any ideas? Apologies if the answer is stating me right in the face :tearsofjoy::tearsofjoy:
 
Hi,what test instrument are you using?

Using the correct AVI would assist in having a true indication of what voltage,is actually present.

You could have the live/line,coming through a component,or you may have lost a neutral,or a few other possibilities.

As strange as it sounds,if you are using the wrong instrument to measure this voltage,you could have a switch upstream,which is open...but full of water :)
 
If you were to measure line to earth when under load and had line voltage then this would indicate a high resistance neutral.
If there is a low voltage line to earth when under load this would indicate a failing connection on the line side.
However both of these also require that the earth is sound!
Essentially it sounds as if all the voltage is being dropped over a high resistance (poor connection, failed switch, dirty contacts, etc.) elsewhere in the circuit and this is not seen when the voltage is measured with the near infinite resistance of a voltage tester.
 
Hi,what test instrument are you using?

Using the correct AVI would assist in having a true indication of what voltage,is actually present.

You could have the live/line,coming through a component,or you may have lost a neutral,or a few other possibilities.

As strange as it sounds,if you are using the wrong instrument to measure this voltage,you could have a switch upstream,which is open...but full of water :)
I’m using a fluke multimeter, I’ll get the megger on it in the morning and see if I get a more accurate voltage reading
 

Reply to Disappearing voltage under load in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock