Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. angel While you're here, would you mind checking out our Electrician's Insurance section to see if we could save you a few quid? - Specifically our Van Insurance Deals and Public Liability Insurance Deals. Thanks for supporting the forum! angel

    5% Discount from Electrical2Go.co.uk for ALL members! - Click Here

Enclosure Labelling

Discussion in 'Electrical Forum' started by SKY, Sep 4, 2013.

Discuss Enclosure Labelling in the Electrical Forum area at ElectrciansForums.co.uk.

Thread Status:
Not open for further replies.
Please make sure you checkout our forum sponsors, many do discounts for members and, they keep the forum free to use.
  1. SKY
    Offline

    SKY Electrician's Arms

    Location:
    Essex
    On a site and I have had a disagrement with a guy who has fitted some acess control equipment.

    The control equipment is a wall mounted enclosure (plain white box with screw holding the lid on) and is fed by 230v by fuse spur.

    I'm telling him that it must be labelled with 230v on a yellow sticker he is saying its not.

    Please advise me chaps.
     
  2. telectrix
    Offline

    telectrix Scouser and Proud of It Trusted Advisor

    Top Poster Of Month

    Location:
    cheshire/staffordshire
    Business Name:
    Telectrix
    sorry, mate. you're wrong. it's equipment with > 230V to E that needs a warning label. BGB 514.10.1.
     
  3. Guitarist
    Offline

    Guitarist Trusted Advisor

    Location:
    Norfolk
    I bet there's 240v+ in there. ;)
     
  4. kingeri
    Offline

    kingeri Trusted Advisor

    Location:
    Yorkshire
    Although putting a label on it wouldn't do any harm, albeit it would be a bit pointless!
     
  5. telectrix
    Offline

    telectrix Scouser and Proud of It Trusted Advisor

    Top Poster Of Month

    Location:
    cheshire/staffordshire
    Business Name:
    Telectrix
    but same reg also says if you would not expect a voltage above 230V. we all know that 230V is a mythical figure, only achieved by building i around 10 -15V Volt drop into the design of a circuit.
     
  6. SKY
    Offline

    SKY Electrician's Arms

    Location:
    Essex
    Thanks All
     
Loading...
Similar Threads - Enclosure Labelling Forum Date
"Line products" junction enclosures Electrical Tools and Products Tuesday at 7:57 PM
Shower RCD enclosure options Electrical Tools and Products Sep 5, 2018
Thread Status:
Not open for further replies.

Share This Page

Electricians Directory Post a Domestic Job Post a Commercial Job