HDMI from a central point

[Octopus]

I'm off to look at a job this morning where the "outline" spec for an extension and along with the normal sparky bits there is requirements for HDMI cables to run from various points back to a central point.

I'm aware that some cables will run up to 15m - anyone got any experiences (good and bad) of doing such an install??

Thanks

 

[topquark]

I've used a pre made 15m without issue (caravan). Make sure they are version 1.4. and keep in mind the connectors won't generally fit in 20mm if pulling in later Keep in mind you'll need two cat5/6 per feed if you go that route.

 

[topquark]

I've used a pre made 15m without issue (caravan). Make sure they are version 1.4. and keep in mind the connectors won't generally fit in 20mm if pulling in later Keep in mind you'll need two cat5/6 per feed if you go that route.

Just had a nose on the Keene site and cat6 will do HDMI on one now!

HDMI Over Cat

 

[Guest111]

if you're buying pre made leads avoid the ones on fleabay,my mate was having a right problem with his cctv he bought all kinds of new bits THEN he rang me and it was a poxy lead off fleabay.

 

[elliot123]

If your good with computers and that sort of thing, can run HDBaseT and convert it to a hdmi

 

[mayfair]

128.807UK - -- - EXTENDER, HDMI OVER CAT5 TX+RX | CPC

just installed 13 of these not a problem i made the cables up myself

 

[Swcfisher]

These PSG03626 - PRO SIGNAL - HDMI LEAD, ACTIVE, 30M | CPC work fine I've installed loads of them, just make sure there installed with the hdmi labelled monitor at the TV.