Discuss Help finding wall lights. in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

LewisM

-
Esteemed
Reaction score
695
Anybody know of a good brand of exterior wall light that looks similar to the light below, needs to be able to accept conduit from both sides.

Help finding wall lights. {filename} | ElectriciansForums.net
 
Would prefer not too as not a fan of the look personally, I would like the fittings flush on the wall then conduit coming out either side as there are four of them in a row.
 
Would prefer not too as not a fan of the look personally, I would like the fittings flush on the wall then conduit coming out either side as there are four of them in a row.
Not an Electrician then?
 
Only problem with conduit at either side, it's a bother to replace the light in the future, use a T box and enter the light from the top.
Design Plan are a pretty good manufacturer.
 
Only problem with conduit at either side, it's a bother to replace the light in the future, use a T box and enter the light from the top.
Design Plan are a pretty good manufacturer.
The OP wants them flush with the wall Kev
 
I was thinking the T box would be at the top of the fitting, however I suppose the boxes would look a bit unsightly. Well if the conduit must go at both sides, then don't scrimp on the fittings, as you don't want to have to replace them if you fit cheap nasty ones.
 
The wall has a top ledge which sticks out further than the wall so I think it will look a lot smarter with the top of the light sitting against the ledge and sitting flat on the wall and conduit in between the fittings.
 
The wall has a top ledge which sticks out further than the wall so I think it will look a lot smarter with the top of the light sitting against the ledge and sitting flat on the wall and conduit in between the fittings.
Just the sort of install where customers don't realise the methods that need to be employed ti suite their unreasonable needs.
 
I'd sooner enter only from below, but that's me being lazy and not wanting to empty water out and replace the gear every few years.

What about run the conduit right up under the ledge with Tangent tee boxes?
 

Reply to Help finding wall lights. in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock