Discuss Home wifi network in the Computer and Networking Forum area at ElectriciansForums.net

It's not just about joining 2 routers together, you need to setup SSID, DHCP, SECURITY & IP correctly.

Main router:
I.P Address - 192.168.1.1
Subnet mask - 255.255.255.0
DHCP - on

2nd router (Access point):

SSID - The same as your main router
Security authentication method the same as your main router
Security encryption type the same as your main router
Security key the same as your main router
I.P Address - 192.168.1.2
Subnet mask - 255.255.255.0
DHCP - off

Make sure you only have 1 DHCP server running on the network as there will be I.P conflicts.

The Devolo ones I use, you plug in near the router, push a button on the router and then the Devolo, then the Devolo uses all the settings per the router. easy peasy
 
It's not just about joining 2 routers together, you need to setup SSID, DHCP, SECURITY & IP correctly.

Main router:
I.P Address - 192.168.1.1
Subnet mask - 255.255.255.0
DHCP - on

2nd router (Access point):

SSID - The same as your main router
Security authentication method the same as your main router
Security encryption type the same as your main router
Security key the same as your main router
I.P Address - 192.168.1.2
Subnet mask - 255.255.255.0
DHCP - off

Make sure you only have 1 DHCP server running on the network as there will be I.P conflicts.
i bet you have your own dns cache as well lol
 

Reply to Home wifi network in the Computer and Networking Forum area at ElectriciansForums.net

Similar Threads

I am quoting for a EVCP install. The location is too far from the house to get a signal from the router. I realise I could go down the route of...
Replies
7
Views
5K
Before I pay an electrician to come check my work, I thought it worth a post here. I don't want to pay the cost of a small car for a whole-house...
Replies
0
Views
1K
Please advise what I should test / check next. My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Replies
45
Views
3K
I'll start by saying - I have absolutely no intention of doing any wiring or anything electrical myself. You get someone professional to do a...
Replies
8
Views
789
Hi All, My 1 and half Smeg cooker recently tripped when using the main fan oven. It was during quite a long period of cooking a roast. We reset...
Replies
2
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock