Discuss Honeywell ADE Accenta G4 panel & 8EP417A RKP? in the UK Electrical Forum area at ElectriciansForums.net
Share this page
OP
Steveo
-
- Reaction score
- 0
Sorry Pete tried to put this in the alarm forum yesterday.
Wondered if anyone can help please. Just installed the above & initially had a problem with tamper lock out ! Suspected the exterior bell/strobe, so bridged A&T on panel.(will sort the tamper switch later) That cleared the fault. So carried on with setting the rkp ! walk test seemed to work and set time & date. When put into alarm state, am getting "program 1 set" with audible KP sounder. Think I may of set up something incorrectly, but not sure what the next step is ? Only using 4 zones with a passive for entry/ exit. Haven't done anything with the other Zones ! Would this be my problem ? or should i reset panel to default ?
Wondered if anyone can help please. Just installed the above & initially had a problem with tamper lock out ! Suspected the exterior bell/strobe, so bridged A&T on panel.(will sort the tamper switch later) That cleared the fault. So carried on with setting the rkp ! walk test seemed to work and set time & date. When put into alarm state, am getting "program 1 set" with audible KP sounder. Think I may of set up something incorrectly, but not sure what the next step is ? Only using 4 zones with a passive for entry/ exit. Haven't done anything with the other Zones ! Would this be my problem ? or should i reset panel to default ?
Reply to Honeywell ADE Accenta G4 panel & 8EP417A RKP? in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi,
Im an electrician but have been installing the odd alarms for some of my customers too.
Used to use the Honeywell Accenta G4 with the...
Hi guys been asked to put a radial in for spurs for a fire alarm panel supply is it okay to use red FP200 to carry 230v? If so or not could you...
Hi all, Im new to the forum and wanted to check something and maybe get some advice confirmation.
Ive got halogen wall lights which use a...
Trying to help out one of my customers who keeps on getting the PV panels stolen from one of his business premises which has a low roof making the...
Good evening
looking for some advice. I have a honeywell galaxy g2 alarm system that i have inherited with a pub I have taken over, I need to do...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.