Industrial

[Monkeyblaine]

If I add a ring main to a fuse board in an industrial unit and certificate it and it tests fine. Then I'm only liable for the work I do, correct?

 

[Engineer54]

If that's all you have worked on, and haven't interfered with other circuits within that DB to accommodate the ring circuit you have installed tested and certified. That is correct!! lol!!

 

[benieb]

You will have to check that all earthing and distribution up to your circuit is ok. Plus main bonds etc.

 

[Engineer54]

You will have to check that all earthing and distribution up to your circuit is ok. Plus main bonds etc.

I would have assumed that as an electrician, those checks would have been made before any installation work had commenced. ....Or am i assuming too much these day's?? lol!!

 

[Monkeyblaine]

Exactly what I thought. But someone was feeding me different information. And yes I will of course check all above before commencing with any work. Thanks everyone.

 

[Monkeyblaine]

Ok I've checked distribution (fed directly from main busbar) checked ze (0.63 ohms for TNS) all fine and checked all bonding present and correct. Is there anything else industrial pros would check before commencing work. Thanks for help.

 

[telectrix]

yep. locate the works canteen, and the company accounts dept. for your invoice to go to.

 

[Monkeyblaine]

Haha. Thanks.