Discuss Issue with my Fluke 115 Meter... in the Electrical Tools and Products area at ElectriciansForums.net

HumbleWorker 91RT

-
Trainee
Reaction score
33
Hi guys and girls,

I am having a slight issue with my multi meter,

its display has randomly flickered whilst on voltage then the continuity buzzer just went off.. and the screen crashed.

I have a feeling it's shorted internally due to the strange behaviour, when I use the rotary to turn it off then back on it resets...
I must also say I haven't had it calibrated since I first got it three years ago.

Anyone had a similar issue?.

Cheers,
HW
 
If it hasn't been used much then there may be dust/dirt in the rotary contacts. Have you tried rotating the dial a number of times to wear away any surface grime? Can you get into it with some contact spray?
Murdoch - do you have your multimeter calibrated? MFT yes but multimeter?
 
If it hasn't been used much then there may be dust/dirt in the rotary contacts. Have you tried rotating the dial a number of times to wear away any surface grime? Can you get into it with some contact spray?
Murdoch - do you have your multimeter calibrated? MFT yes but multimeter?

Hey RPA,

Yeah I've been using it the past week quite a lot so it's usage should of sorted out any sort etc banana ports seem clean and sprayed contact clean on them
 

Reply to Issue with my Fluke 115 Meter... in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
2K
Hi! Some help would be appreciated! I've just moved into new house, wanting to check insulation resestance etc as getting some nuisance...
Replies
2
Views
308
Hello, I’ve got an issue driving me crazy and can’t get anyone to figure it out as it’s not their issue. We had a new extension, single rear...
Replies
9
Views
993
This is quite lengthy so get comfy... I had a bizarre call out relating to a job I attended about five years ago. The situation was they were...
Replies
11
Views
1K
I have a question for you all, We recently moved, and the old house had the analog meter on it, the new place has 3 structures on the property.. a...
Replies
10
Views
3K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock