Discuss Joining NICEIC in the Business Related area at ElectriciansForums.net

J

Jabbajaws

Does any one know the minimum no of jobs required to join NICEIC, what they are, and whether or not they can ALL be covered under the self-certification scheme if assessment is approved?

Input appreciated...

Jabbajaws :confused:
 
Does any one know the minimum no of jobs required to join NICEIC, what they are, and whether or not they can ALL be covered under the self-certification scheme if assessment is approved?

Input appreciated...

Jabbajaws :confused:
for domestic installer its 2 jobs, 1 major 1 minor.

for approved contractor its 5 jobs, 2 major 3 minor ;)
 
new installation of a consumer unit or full or part rewire etc for a minor works it could be a new socket outlet added to an excisting installation like kitchin ring final circuit or bedroom - living room etc , you need two seperate sites for each job hope this helps
 
Last edited by a moderator:
as fare as i knw it would as the consumer unit requires its own circuit u'll need to produse an electrical installation certificate for the c/u change you download the green specimen cert from the niceic website for none registered niceic contracters good luck
 
Last edited by a moderator:
Hi,
The NICEIC has two Rolls, the Approved Contractor (AC) and the Domestic Installer (DIS). The AC Roll is for anyone carrying out any type of electrical work, the DIS Roll is for domestic work only.
For the AC Roll you require five jobs.
The DIS Roll you require two jobs. For this Roll the very minimum required for one of them is a new circuit, however it cannot be just 1M long as they cannot get an assessment of your capabilities, it must be run across the dwelling and comply with all the latest regulations, for this you will need an Electrical Installation Certificate, the second can be an addition or alteration to an existing circuit and a Minor Works Certificate should have been issued.
 
Once again guys thanks for all the comments. So im guessing the path to start out on then is DIS and get enough experience to go for AC eventually. What sort of money would l be expecting to pay then for the membership plus assessment and registration fees, anyone? I need a rough idea before setting anything in stone...
 
Check out the NICEIC website, I think it's about £440.00 by direct debit and £460.00 by other means.
For DIS you need Part P and eventually 17th Ed.

Gary

Just got on their website and it's £425.50 by dd and £448.50 by other.

Gary
 
Last edited:
I thought that anything in the garden was notifiable, ie garden lighting.

So a CU in a brick built workshop with lighting and power circuits surely should count as notifiable.

Gary

The circuit that feeds the garage is notifiable but everything else isnt, unless you put a socket on the outside of the garage wall.

App Doc P Page 8
 
Check out the NICEIC website, I think it's about £440.00 by direct debit and £460.00 by other means.
For DIS you need Part P and eventually 17th Ed.

Gary

Just got on their website and it's £425.50 by dd and £448.50 by other.

Gary


I thought being a member of NICEIC was your part P, this is so bloody confusing this part P
 
The way I see it is that Part P confirms your understanding of domestic building regs rather than electrical knowledge. I took mine at Able Skills in Dartford and most of the questions were about building regs.

Gary
 
I know that, I was trying to help the previous post about the the role of NICEIC, ie. they are not the Part P part(!) of registration with them. Although they do provide courses.

As I am new to this site I don't know if the procedure for AC and DIS has been laid out, if not then rather than several posts perhaps one section where ones options are in a flow chart?
 

Reply to Joining NICEIC in the Business Related area at ElectriciansForums.net

Similar Threads

Hi all Just qualified last Monday and I have completed both initial and periodic test and inspection courses. What is the process for joining the...
Replies
2
Views
1K
NICEIC Certification Scheme Getting accredited to
Looking for some advice regarding joining a CPS. I've been in the electrical industry in various roles for nearly 10 years. I started my...
Replies
15
Views
872
Morning all, We are looking at qualification requirements for inspection and testing to BS EN 60204, all of our work is past the main isolator of...
Replies
2
Views
709
Hi guys, I've gotten AI to write up a terms and conditions for my company and then went through it with AI and tweaked it to make it sound a...
Replies
3
Views
353
Hi Folks , Just looking for a bit of advice as I'm looking to get back on the tools so please bare with me if this is a bit long winded. I'm a...
Replies
1
Views
580

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock