Kitchen First Fix

[rolyberkin]

How do people put in feeds to under cupboard lights? I would normally run T&E to a slim pattress or small white project box mounted on bottom of eye level cupboard to joint to the lights, interested in what others do?

 

[Leesparkykent]

How do people put in feeds to under cupboard lights? I would normally run T&E to a slim pattress or small white project box mounted on bottom of eye level cupboard to joint to the lights, interested in what others do?

secured JB with strain relief on top of cupboard and run the cable from the under cupboard lights behind the units in the small gap that accommodates the wall brackets for the cupboards to the JB.

 

[Midwest]

Ditto above, drivers/jb on top of wall units out of sight. Much to the annoyance of the kitchen fitter, who has to put tiny notches in the back of the wall unit.

 

[Deleted member 93172]

Or, wire main sw feeds to the top of the cupboards and terminate in a suitable connection box, then chase in plastic conduit down walls behind cupboards to level with the bottom, then drop either driver cables or 230v cables through the conduits to light fittings.