Klix roses

[Cj24]

I can't quite get my head round wiring through klix, if in a room I have a pir which will be off a 4 pin klix and 1 em light obv off a 4 pin and a non emergency off a 3 pin how do I go about wiring it off a key sw?

 

[mogga]

live through Key sw to A pin on 4pin greg PIR Live to A Pin Load to Sw N to N E to E take your switched side off the back of greg in 3core+earth pin A is your Perm feed loop it through 3 pin gregs the switch wire neutral and earth wire as normal

 

[Cj24]

Sorry I don't understand that, if it's via a key sw then there is goin to be a perm feed and a sw feed at ya first 4 pin klix which is my pir so do I put my sw in live and perm in aux then perm out of aux into aux on my next 4 pin which is emergency and just live to live to live of both 4 pins and 3 pin and will this work?

 

[Mr Mark Sparks]

from cu to loop
loop to key
key to a
a to feed into pir
out of pir to sw term

 

[mogga]

Just checking another thread n having a think about this If the key is turned off then all lighting would go out mark would

CU to A
Ato key sw
Key jointed in greg box to perm on 3 core
3core n earth to 4pin Sw A N 3pin the perm feed into Loop??