Y
Yorkiepuddingus
Hi,
I'm new to the Forum and I'm a keen DIY enthusiast...bt only within the limit of my skills....so I'm after some advice.
I am changing my PIR lights NOT the actual wiring circuit.
I have two PIR Lights that are connected and operated by oneswitch (in the kitchen).
The PIR light has wires coming to it (from the circuit) onfour connections of: Grey (x1) with a brown sleeve; Brown x 2;Earth x 2; and Blue and Black (with a blue sleeve).
The new PIR has more modern fittings inside it (including avery small circuit board and a small box that has blue, red and brown wiresconnecting to the light fitting).
The connection from the light unit just has 3 connections –one has a brown, another has blue and the last one is empty.
How should I connect up the wires coming to the light fromthe circuit?? (The light is polycarbonate so there is no earth required)
Appreciate any advice you can give. Many Thanks
I'm new to the Forum and I'm a keen DIY enthusiast...bt only within the limit of my skills....so I'm after some advice.
I am changing my PIR lights NOT the actual wiring circuit.
I have two PIR Lights that are connected and operated by oneswitch (in the kitchen).
The PIR light has wires coming to it (from the circuit) onfour connections of: Grey (x1) with a brown sleeve; Brown x 2;Earth x 2; and Blue and Black (with a blue sleeve).
The new PIR has more modern fittings inside it (including avery small circuit board and a small box that has blue, red and brown wiresconnecting to the light fitting).
The connection from the light unit just has 3 connections –one has a brown, another has blue and the last one is empty.
How should I connect up the wires coming to the light fromthe circuit?? (The light is polycarbonate so there is no earth required)
Appreciate any advice you can give. Many Thanks