Discuss New Shower installation help in the DIY Electrical Advice area at ElectriciansForums.net

T

Trev69

Hi all, first of all I've got to say I know very little about electrics, hence coming on here. I have just bought an old cottage which I intend modernising. I will be doing most of the work myself, bit by bit. I recently installed a 9.6 amp shower over the bath, and as there is a 15 amp socket available, used for the washing machine with the old round pin plug, I plugged the shower into that, but it blew one of the fuses in the fuse box. I put a new bit of fuse wire in and the shower worked for a couple of times then the fuse blew again. Surely if it is a 15 amp plug it should work a 9.6 amp shower? Would it be better to wire a seperate socket for it?
 
Hi all, first of all I've got to say I know very little about electrics, hence coming on here. I have just bought an old cottage which I intend modernising. I will be doing most of the work myself, bit by bit. I recently installed a 9.6 amp shower over the bath, and as there is a 15 amp socket available, used for the washing machine with the old round pin plug, I plugged the shower into that, but it blew one of the fuses in the fuse box. I put a new bit of fuse wire in and the shower worked for a couple of times then the fuse blew again. Surely if it is a 15 amp plug it should work a 9.6 amp shower? Would it be better to wire a seperate socket for it?
9.6 Amp? do you mean 9.6 KW?
 
Agree that is 9.6kw which is over 40A. I think you need an electrician to install a new circuit.
 
height warning is 9.6 (in feet). not 9.6 metres. (kilowatts, not amps)

upload_2017-11-16_10-56-47.jpeg
 
You need a new cable ....... And a dedicated circuit with rcd protection
 
  • Like
Reactions: DPG
The OP might be somewhat embarrassed for confusing Amps w3ith Kilowatts, nothing to be embarrassed about Mate, we all make mistakes, come back all is forgiven.
 
You'd have to wonder why he was attempting this though when he's clearly electrically incompetent.
 
Just had a mate round who knows more about electrics than I do (not hard). He says should definately not be a 15 amp socket and washing machine next to bath, and the difference between amps and kw! He says house needs total rewire, as fuse box has fuses in live and neutral. He says wiring very old and should not be used. Loks like we're going to be busy! Thanks for info anyway
 
You'd have to wonder why he was attempting this though when he's clearly electrically incompetent.
I know it's not right to attempt something like this
Just had a mate round who knows more about electrics than I do (not hard). He says should definately not be a 15 amp socket and washing machine next to bath, and the difference between amps and kw! He says house needs total rewire, as fuse box has fuses in live and neutral. He says wiring very old and should not be used. Loks like we're going to be busy! Thanks for info anyway
Your mate, is he an electrician?
 
Just had a mate round who knows more about electrics than I do (not hard). He says should definately not be a 15 amp socket and washing machine next to bath, and the difference between amps and kw! He says house needs total rewire, as fuse box has fuses in live and neutral. He says wiring very old and should not be used. Loks like we're going to be busy! Thanks for info anyway
that fuse box has to be older than me, then.
 
Wouldn't mind seeing a pic of you fuse board OP.
 
I feel the force dragging me to the dark side on this thread.... I'm being a good boy and leaving..
 
I feel the force dragging me to the dark side on this thread.... I'm being a good boy and leaving..
Me to I PMd the OP no response, so I'm off as well
 
Thread closed....@Trev69 what profile would you prefer to keep? This old one or the one you've been using most recently? Could you pm me and let me know.
 
  • Like
Reactions: DPG

Reply to New Shower installation help in the DIY Electrical Advice area at ElectriciansForums.net

Similar Threads

Hi, I`m looking for an advice. I have an electric shower that I`m not using due to boiler changed to combi and added shower over bath feed by a...
Replies
1
Views
905
Hi, after a bit of advice. Have tried a lot of plumbing and electrical shops but no one seems able to help. I have an Isolator/PSU 230v/12v. It is...
Replies
11
Views
856
Hi, The shower pull chord switch has snapped at my mom’s home and having unscrewed the switch I discovered a horror show(see pic). So I’ve had...
Replies
39
Views
3K
DIY ENTHUSIAST NEW FORUM MEMBER. I took a photograph of the old wiring set up( which was working) and used it as a guide for wiring the new one...
Replies
12
Views
1K
Hi, I'm installing a Hoover oven and would like a little help please. The oven code is HOC3158IN. The oven manual states "The power cable must...
Replies
9
Views
592

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock